i was searching for a article but found no luck. anyone know what the loudest blow off valve is, im looking for more on the lines of a high pitch sound. thx.
Announcement
Collapse
No announcement yet.
loudest blow off valve?
Collapse
X
-
loudest blow off valve?
James G.
sobe83@yahoo.com
AIM: DVS 323BPT
MySpace
Cardomain
<BR>
<marquee>Turbonetics T3/T4, RC 550cc injectors, Walbro fuel pump, SSAutochrome Miata manifold, Tial 35mm wastegate, large FMIC, Apex-I SAFC, GReddy Type S BOV, 2.5" aluminum charge pipes, NGK plugs/wires, RX-7 VAM, 3" turbo-back exhaust, ARP head studs, H&R Springs, S/R struts, Sony XPlod deck-2/12" subs, Power Acoustic 800w amp, Pioneer speakers, Evo front bumper, ADR DV8 17" wheels.</marquee>Tags: None
-
HKS make a pretty loud BOV, basically if oyu can associate it with rice (no offence) you have a pretty good chance of it being loud.When you turn your car on... does it return the favor?
Originally posted by goldstarYes, still have it. It was my attempt to immortalize you in verse.
A Protege driver named Brock
Once said 7 seconds he'd clock.
So his engine he goosed
With much too much boost,
And drove a rod through his block.
-
I don't know personally, but I've heard that the Greedy type S is pretty loud.
Adam
1991 Protege GTR1991 Mazda 323 GTR Sedan
MODS:
GTR motor swap, F&R Familia strut bars, MX-3 Rear Lower strut tie bar, GTX front bumper, GTX grill, EDM headlights & corners, EDM 323 rear garnish, EDM spoiler, EGT sideskirts, MX-3 seats, GTX steering wheel, EGT glass sunroof, WRX hood scoop (functional!!), and other things that take too much space to list.....
TO DO LIST:
EDM/JDM rear bumper
EDM/JDM power folding mirrors
Repaint car
Comment
-
The HKS SSQ is really loud plus it's high pitched. But my fav. by far is the Greddy Type-S!-Robert
'93 Protege Turbo LX 5-speed
-GTX VJ-20 turbo w/ custom downpipe, Haltech E6K Kit w/ 3Bar MAP sensor & O2 sensor (Engine Management System), .040 overbored pistons with slightly raised compression, Resurfaced cylinder head & valve job, GReddy Type-S BOV, Turbo XS boost controller, 450cc injectors, Walbro 255lph fuel pump, 22"x9"x3" FMIC, full 3" exhaust w/ Catco Catylic converter & Summit Turbo Muffler, ACT Clutch Kit (stage 2), Uretheane shifter bushing, Triple Gauge Pod w/ Boost, Air/Fuel Ratio, and Oil Pressure gauges, Falken Azenis Sport 195/60HR14 tires on steelies.
Comment
-
a lot of people have beein saying the turboxs rfl, i might just go with that . by the way skullet, that avatar still scares the poop outta me.James G.
sobe83@yahoo.com
AIM: DVS 323BPT
MySpace
Cardomain
<BR>
<marquee>Turbonetics T3/T4, RC 550cc injectors, Walbro fuel pump, SSAutochrome Miata manifold, Tial 35mm wastegate, large FMIC, Apex-I SAFC, GReddy Type S BOV, 2.5" aluminum charge pipes, NGK plugs/wires, RX-7 VAM, 3" turbo-back exhaust, ARP head studs, H&R Springs, S/R struts, Sony XPlod deck-2/12" subs, Power Acoustic 800w amp, Pioneer speakers, Evo front bumper, ADR DV8 17" wheels.</marquee>
Comment
-
yah i really want that high pitch sound, make people jump on the streetJames G.
sobe83@yahoo.com
AIM: DVS 323BPT
MySpace
Cardomain
<BR>
<marquee>Turbonetics T3/T4, RC 550cc injectors, Walbro fuel pump, SSAutochrome Miata manifold, Tial 35mm wastegate, large FMIC, Apex-I SAFC, GReddy Type S BOV, 2.5" aluminum charge pipes, NGK plugs/wires, RX-7 VAM, 3" turbo-back exhaust, ARP head studs, H&R Springs, S/R struts, Sony XPlod deck-2/12" subs, Power Acoustic 800w amp, Pioneer speakers, Evo front bumper, ADR DV8 17" wheels.</marquee>
Comment
-
Heres a small clip of my car on the dyno with a TurboXS H34 BOV.
Dyno Run (218whp)
You'll need QT4 or 5 to run it if it doesn't open in WMP.Last edited by turboge; 10-01-2003, 07:11 PM.-Braden
'05 WRX
GTX Groupbuy is Closed! However you can still pick up a GTX motor for only $925!!! PM me for order details!
Comment
-
TurboXS RFL...basically stands for Really ****ing Loud... but It sounds like ass on low boost cars if you ask me.
It's rated at like 115dB? If you want it to sound good but still be loud, get the TurboXS TypeH or TypeS(106dB) which is what I have. It screams above 5 psi.
Or like they said tryp the Greddy TypeS or HKS SSQV, both rated at around 80-90dB. The only reason they seem loud is because the sound is so high pitched it just stands out.01 Protege 2.0
Turbo
Comment
-
yeah the hks ssqv is more of a whistle, while the others are more of a whoosh, http://www.blowoffvalves.com/.....HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
Comment
Comment