Announcement

Collapse
No announcement yet.

hooking up a turbo timer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    hooking up a turbo timer

    are turbo timers relativley easy to install? i know its just wires, but how do i find what wires go where. im gonna be getting a greddy turbo timer here soon, a cheat sheet or someone telling me which wire goes where would be nice
    James G.
    sobe83@yahoo.com
    AIM: DVS 323BPT
    MySpace
    Cardomain
    <BR>

    <marquee>Turbonetics T3/T4, RC 550cc injectors, Walbro fuel pump, SSAutochrome Miata manifold, Tial 35mm wastegate, large FMIC, Apex-I SAFC, GReddy Type S BOV, 2.5" aluminum charge pipes, NGK plugs/wires, RX-7 VAM, 3" turbo-back exhaust, ARP head studs, H&R Springs, S/R struts, Sony XPlod deck-2/12" subs, Power Acoustic 800w amp, Pioneer speakers, Evo front bumper, ADR DV8 17" wheels.</marquee>

    #2
    It's very simple, a test light is all you need to determine your wiring. I hook mine up to the key cylinder wires.
    -Braden
    '05 WRX

    GTX Groupbuy is Closed! However you can still pick up a GTX motor for only $925!!! PM me for order details!

    Comment


      #3
      nice i shouldnt have too much problems then.
      James G.
      sobe83@yahoo.com
      AIM: DVS 323BPT
      MySpace
      Cardomain
      <BR>

      <marquee>Turbonetics T3/T4, RC 550cc injectors, Walbro fuel pump, SSAutochrome Miata manifold, Tial 35mm wastegate, large FMIC, Apex-I SAFC, GReddy Type S BOV, 2.5" aluminum charge pipes, NGK plugs/wires, RX-7 VAM, 3" turbo-back exhaust, ARP head studs, H&R Springs, S/R struts, Sony XPlod deck-2/12" subs, Power Acoustic 800w amp, Pioneer speakers, Evo front bumper, ADR DV8 17" wheels.</marquee>

      Comment


        #4


        here it is, what wires go where. im guessing 5 goes to ground, 4 goes to an optional harness, 1-2-3 are for ignition wires?
        James G.
        sobe83@yahoo.com
        AIM: DVS 323BPT
        MySpace
        Cardomain
        <BR>

        <marquee>Turbonetics T3/T4, RC 550cc injectors, Walbro fuel pump, SSAutochrome Miata manifold, Tial 35mm wastegate, large FMIC, Apex-I SAFC, GReddy Type S BOV, 2.5" aluminum charge pipes, NGK plugs/wires, RX-7 VAM, 3" turbo-back exhaust, ARP head studs, H&R Springs, S/R struts, Sony XPlod deck-2/12" subs, Power Acoustic 800w amp, Pioneer speakers, Evo front bumper, ADR DV8 17" wheels.</marquee>

        Comment


          #5
          ok i think i got it, 1-2-3 are unessecary, 4 i cut off the tip and those three wires go to ignition and 5 goes to ground. easy...
          Last edited by limpgtx; 10-09-2003, 03:51 PM.
          James G.
          sobe83@yahoo.com
          AIM: DVS 323BPT
          MySpace
          Cardomain
          <BR>

          <marquee>Turbonetics T3/T4, RC 550cc injectors, Walbro fuel pump, SSAutochrome Miata manifold, Tial 35mm wastegate, large FMIC, Apex-I SAFC, GReddy Type S BOV, 2.5" aluminum charge pipes, NGK plugs/wires, RX-7 VAM, 3" turbo-back exhaust, ARP head studs, H&R Springs, S/R struts, Sony XPlod deck-2/12" subs, Power Acoustic 800w amp, Pioneer speakers, Evo front bumper, ADR DV8 17" wheels.</marquee>

          Comment

          Working...
          X