Announcement

Collapse
No announcement yet.

224whp Protege5

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    224whp Protege5

    Ok...all my pulls were around 10psi. Pump Gas 93octane. EMS -> MPI Tunner

    Sometimes It would do only 9.5 and sometimes near 11psi

    I used the dyno to just do some fine tuning and see the graphics results and to check for ping and knock. And actually...it happened when added some timing @ 3000rpms and up top 6300rpms.

    Surprisingly...my tunning was good...a map similar to what Little Beavis did for me on the streets @ 6-7psi. So I added some more fuel, pulled some timing and went up to 10+psi.

    At this moment I was very concerned with pinging and detonation and guess what, I was 2 degrees before it starts to get noticed. So now Im pulling 11 degrees off.

    Video: http://home.coqui.net/igdrasil/mpi/MPIDyno.wmv



    Click here for more Pictures of my car, engine and turbo stuff.

    PIAA H3 Ion Fog Lights - Spool stage 3 kit - Eibach springs - MP3 RH Wheels - Custom 2.5in exhaust pipe- 3" DynoMax Racing Exhaust - Greddy EGT and A/F - AWR Motor Mounts - ACT Clutch Kit - DGM CF Front Air Dam
    ***In-car Video***15.1s
    ***In-car Video***15.3
    Best run on 7psi: 14.97 @ 94.75Mph - 2.46 60ft

    #2
    ****ing right, great numbers!
    .....HELLO MY NAME IS BEN...



    186.08whp
    225.94wtq
    torque monster!!!!
    dyno graph 8-10-and 12psi
    http://www.msprotege.com/members/THE...no%20graph.jpg
    http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid

    blahblahblahblahblahblah

    Comment


      #3
      Are you running a T3/4 or a T3??

      Comment


        #4
        Originally posted by McCorkle
        Are you running a T3/4 or a T3??
        a regular T3


        Click here for more Pictures of my car, engine and turbo stuff.

        PIAA H3 Ion Fog Lights - Spool stage 3 kit - Eibach springs - MP3 RH Wheels - Custom 2.5in exhaust pipe- 3" DynoMax Racing Exhaust - Greddy EGT and A/F - AWR Motor Mounts - ACT Clutch Kit - DGM CF Front Air Dam
        ***In-car Video***15.1s
        ***In-car Video***15.3
        Best run on 7psi: 14.97 @ 94.75Mph - 2.46 60ft

        Comment


          #5
          Originally posted by igdrasil
          a regular T3
          That's good to hear. Gives me some hope for the MP3.

          Comment


            #6
            Also, I know you have blown up your motor a few times. I am assuming you have gone with forged internals by now?

            Comment


              #7
              damn, that power band is nice and smooth

              Comment


                #8
                Originally posted by McCorkle
                Also, I know you have blown up your motor a few times. I am assuming you have gone with forged internals by now?

                nope...not yet!


                Click here for more Pictures of my car, engine and turbo stuff.

                PIAA H3 Ion Fog Lights - Spool stage 3 kit - Eibach springs - MP3 RH Wheels - Custom 2.5in exhaust pipe- 3" DynoMax Racing Exhaust - Greddy EGT and A/F - AWR Motor Mounts - ACT Clutch Kit - DGM CF Front Air Dam
                ***In-car Video***15.1s
                ***In-car Video***15.3
                Best run on 7psi: 14.97 @ 94.75Mph - 2.46 60ft

                Comment


                  #9
                  Nice numbers, and a nice video. Great insight at dyno tuning. What software is that on the laptop? And what is the laptop connected to?

                  Comment


                    #10
                    badass d00d.
                    The T3 BP MX-3 conversion has begun, and is taking forever & will kill me.

                    Comment


                      #11
                      Damn... yo u make me hate my car...lol.... good stuff man.

                      Comment

                      Working...
                      X