Dont have much time to elaborate on what im tryin to do with the car. but i just wanted some input on if it can be done...Or has it been done..or attempted? I was sugggested that i should swap the N/A 2nd gen Rx7 5 lug rotor/suspenion etc onto my pro..and it sounded like a great idea to me..but can it be done?
Announcement
Collapse
No announcement yet.
2nd gen RX7 5lug conversion
Collapse
X
-
unlikely, since the rx7 is RWD and doesn't have splines for ur axle to pop into on the front hubs
the 626/probe/mx6 might be a possibility however.93' Noble Green MX-ZE (sold )
02' Graphite Grey WRX Stage 4, 286whp
05' Pontiac Vibe daily driver, lowered/tinted/rims
Comment
-
never tried it myself, but it might be possible to just take the hubs, press out the spindles & press in teh 4-lug spindles...
then you'd need to figure out what kind of rotors to use, but hey, you'd have the better calipers at least93' Noble Green MX-ZE (sold )
02' Graphite Grey WRX Stage 4, 286whp
05' Pontiac Vibe daily driver, lowered/tinted/rims
Comment
Comment