I have a 1990 323 SOHC. If I buy a Ford Escort Gt do I just swap the engines and ECU? can I keep my manual transmission from the 323? are the engine mount points the same?
Announcement
Collapse
No announcement yet.
Engine Swap info
Collapse
X
-
what are u swapping into whatJames G.
sobe83@yahoo.com
AIM: DVS 323BPT
MySpace
Cardomain
<BR>
<marquee>Turbonetics T3/T4, RC 550cc injectors, Walbro fuel pump, SSAutochrome Miata manifold, Tial 35mm wastegate, large FMIC, Apex-I SAFC, GReddy Type S BOV, 2.5" aluminum charge pipes, NGK plugs/wires, RX-7 VAM, 3" turbo-back exhaust, ARP head studs, H&R Springs, S/R struts, Sony XPlod deck-2/12" subs, Power Acoustic 800w amp, Pioneer speakers, Evo front bumper, ADR DV8 17" wheels.</marquee>
-
i believe he is talking about swapping in a BP-DE for the B6-MEWhen you turn your car on... does it return the favor?
Originally posted by goldstarYes, still have it. It was my attempt to immortalize you in verse.
A Protege driver named Brock
Once said 7 seconds he'd clock.
So his engine he goosed
With much too much boost,
And drove a rod through his block.
Comment
-
trannies will bolt up, but the mounts are different, and so are the axles, probably....since the BP is about 1 inch longer..."Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
-
Originally posted by bcowie
so i need the transmission as well and new axles..
So in total
I need:
ECU
Engine
Transmission
Will the engine and transmission fir properly in the 323?Dan
dreesemonkey
Comment
Comment