If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Damn, we actually have parts made for us! Nice! If any one is good with Venom products, could they decribe in not too much of the detail as to what they do? For example, can I just get the Venom 400 module, even though my engine is bone stock (except for the CAI)? Thanks.
Last edited by turbonium959; 08-31-2003, 09:45 AM.
"Probable impossibilities are to be preferred to improbable possibilities."
I don't think I would bother with the chip, and the injectors on the 1.5 .. well if you needed more feul for nos orwhatever you could just grab some 1.8 injectors... hehe..
Best thing I think for the 1.5 ,
a custom T25 manifold with turbo and downpipe
as straight as possible 3" or 21/4 exhaust.
and the injectors from a 1.8 with an fmu and maybe s-afc..(not sure)
If you can get someone to make the manifold ..it would be so sweet.
Originally posted by bruce95fmla If you can get someone to make the manifold ..it would be so sweet.
www.essentialspeed is willing (and wanting) to make a manifold. Email them at info@essentialspeed.com
Even if there is very little interest, he is willing to make one-offs....
I heard Bruce is going gas ?! Cool Bruce. Let me know before hand if you need help setting up the timing with that stuff I sold and also tell you some other hints (if you want , of course).
Originally posted by bruce95fmla I don't think I would bother with the chip, and the injectors on the 1.5 .. well if you needed more feul for nos orwhatever you could just grab some 1.8 injectors... hehe..
Best thing I think for the 1.5 ,
a custom T25 manifold with turbo and downpipe
as straight as possible 3" or 21/4 exhaust.
and the injectors from a 1.8 with an fmu and maybe s-afc..(not sure)
If you can get someone to make the manifold ..it would be so sweet.
I wish I knew welding.
Bruce
Ok...but even if you did get someon to make a manifold for it..you couldn't push that much boost through it could you???? Also why can't you put the 1.8 manifold on the 1.5???? Also whats a fmu and a s-afc ?????? Also could you get injectors off the 1.8..they would fit...????
Heh, I thought everyone knew there was venom parts for the 1.5? I made a post bout it not long ago. The problem with the parts are... 400+ dollars for those lil parts? I thought about it but I dont have that much money to waste. I'd rather just save the money to buy a 1.8l and do the swap. Anyways, I think the old page is up now.
Originally posted by RacerX Ok...but even if you did get someon to make a manifold for it..you couldn't push that much boost through it could you???? Also why can't you put the 1.8 manifold on the 1.5???? Also whats a fmu and a s-afc ?????? Also could you get injectors off the 1.8..they would fit...????
for the s-afc and the fmu ...
go on www.gogle.com and type that in .. or type in what is .....
I never tried putting my 1.8 turbo manifold on the 1.5 ..
bruce
Comment