Announcement

Collapse
No announcement yet.

test

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    test

    test pics w/ $10 digi camera.
    Attached Files
    Almost there

    jdm tails... check
    jdm bumper... check
    ms lip... check
    ms grill... check
    ms sideskirts... check
    ms rear skirts... check
    ms spoiler... check
    ms struts... check

    Still trying for a bp swap..:
    Fidanzda 8lb flywheel, ACT HD00, UR Crank Pulley, UR Adj. Cam-Gears, Exh-Intake CamShaft Swap, MS Engine Mounts, Custom CAI, PaceSetter Header, 2.25" in/out-let Magnaflow Cat, 2.25" Mandrel-Bent Exhaust.

    #2
    cold air, 2.5" polished tubing for 1.5l, still in r&d phase...fitting, angles, hardware, etc.
    mock up being done(not finished yet) on my dead protege. more info to come to those interested in the intake.

    pics via a cheap @$$ 10 dollar camera from the clearance shelf @ local target.
    Almost there

    jdm tails... check
    jdm bumper... check
    ms lip... check
    ms grill... check
    ms sideskirts... check
    ms rear skirts... check
    ms spoiler... check
    ms struts... check

    Still trying for a bp swap..:
    Fidanzda 8lb flywheel, ACT HD00, UR Crank Pulley, UR Adj. Cam-Gears, Exh-Intake CamShaft Swap, MS Engine Mounts, Custom CAI, PaceSetter Header, 2.25" in/out-let Magnaflow Cat, 2.25" Mandrel-Bent Exhaust.

    Comment

    Working...
    X