whats up, got a question. GTX swap, the fuel bypass procedure. The violet wire into the circut opening relay comes from ecu, black is ground, light green is also an activating wire from the ecu, and the black/pink wire leads to the fuel pump resistor/relay. I was wondering if I splice the black/pink wire to the wire leading to my fuel pump, bypassing the fuel pump resistor. bypassing that relay should still leave the resistor and the heated O2 sensor active.
Thanks in advance.
Dusty
dusty@neb.rr.com
94 protege LX
best pro in the state, if not right now, will be
Thanks in advance.
Dusty
dusty@neb.rr.com
94 protege LX
best pro in the state, if not right now, will be
Comment