Ive looked around but had no luck on trying to find out how to wire up the dash for a gtx swap? Anything on how to do it for a escort or protege will help. Id like to know both if possible.
Announcement
Collapse
No announcement yet.
How to wire up dash for gtx swap?
Collapse
X
-
if you are swapping a gtx engine harness into an escort there are two plugs that have to be cut and replaced with the egt ones after splicing both together. people always forget to mention that little bit. for a protege you don't have to do this.
^^ those are the plugs you are looking at swapping the 323 ones for your egt ones.
happy boosting.
Comment
-
i have a LHD GTX harness and its a 100% straight swap....heh that pic looks familiar91 323 GTX @ 16psi, 5 speed || December 07 R.O.T.M.
Powered by MegaSquirt I PCB3, Tuned by Lex
More Information
Comment
-
Does anyone have some good pics on how to do it with a RHD harness. I have tried to figure out wiring diagrams but im not the best at it!!!! Any how tos or pics or ANYTHING will help! Thanks guys! The dash wiring is the only thing holding me up on this swap. i dont want to do it wrong and something go wrong!
Comment
-
Originally posted by FoescortDoes anyone have some good pics on how to do it with a RHD harness. I have tried to figure out wiring diagrams but im not the best at it!!!! Any how tos or pics or ANYTHING will help! Thanks guys! The dash wiring is the only thing holding me up on this swap. i dont want to do it wrong and something go wrong!
Me VBGarage HERE
"90% of young people that get into car accidents say "OH ****". The other 10% are from Wisconsin and say "Hold my beer and watch this!".
Comment
-
when using a gtx engine harness and ecu into a escort gt then use this.
take a look at this page by jacobb russell, this is how i did
it on my 91 escort gt, you will still have to do something about the fuel pump turn on thought as the gtx harness has a resisitor for the fuel pump
thanks ryan5 boosted bp cars,why...
Comment
Comment