SAFC 2, Instalation Help!

[Fritz360]

I have Escort with the gtx swap. I'm running my stock NA ECU and wire harness. Has anyone used the Safc2 with this setup. If so, how do you wire up the TPS? If you can, pictures would be nice also. Thankx :microwave

[Marc93lx]

http://www.wihandyman.com/forum/showthread.php?t=14315

[D323]

http://www.wihandyman.com/forum/showthread.php?t=14315

thank you... I could NOT find Kreator's site/remember his SN for the life of me.

[Marc93lx]

thank you... I could NOT find Kreator's site/remember his SN for the life of me.

lol - search n00b

get on AIM assface

[Fritz360]

I thought that the SAFC runs or percentage. How do you get that with the stock na harness? The Tps is either on or off, there is not percentage.

[92dx]

I thought that the SAFC runs or percentage. How do you get that with the stock na harness? The Tps is either on or off, there is not percentage.

IIRC, You need the tps off an automatic equiped car to get a variable reading. Its a 4 wire tps. Some1 correct me if Im wrong,

[mikeflys1]

IIRC, You need the tps off an automatic equiped car to get a variable reading. Its a 4 wire tps. Some1 correct me if Im wrong,

Or use a map sensor for its tps input......search i did a writeup before on how.

[Fritz360]

How would I use the auto TPS? Just replace the stock one with the auto TPS, and thats it?

[ScOrTGtC]

dont do that,.. cuz your computer only read on or off... but a 3 bar Map sensor would work.. i hate safc from experience.....

[92dx]

3 wire tps from 5 speed= on-off reading

4 wire tps from auto= 0-100% sweepable reading...

..heres some wiring and other info

http://www.wihandyman.com/forum/show...light=auto+tps