Hey guys, as you know I've been posting alot but hey... what can I say... its Christmas! ^^ haha
Any how I just need to know your thoughts on the quality of this cheapo ebay radiator and if its effecient enough to support our 1.8l engines with a t3 strapped on.
Heres a link of one of the manys found on ebay:
Here is a close estimate of both radiators.
Stock EGT
27x18.75x1 with more or less 1.5 inlets and outlets
Ebay Civic Radiator
15.25x18.75x2 with 1" inlet and outlets difference being about 1/2 inch.
I plan on mounting it front right away from all that heat dispersed by the exhaust and turbine itself. One thing that concerns me is that fact that the inlet and outlet of the civic radiator is noticably smaller compared to that of our stock rad. Would this effect coolant flow? Is it worth it? All opinions are greatly appreciated even some negs as so I can see outside the box as well.
Thanks again
Any how I just need to know your thoughts on the quality of this cheapo ebay radiator and if its effecient enough to support our 1.8l engines with a t3 strapped on.
Heres a link of one of the manys found on ebay:
Here is a close estimate of both radiators.
Stock EGT
27x18.75x1 with more or less 1.5 inlets and outlets
Ebay Civic Radiator
15.25x18.75x2 with 1" inlet and outlets difference being about 1/2 inch.
I plan on mounting it front right away from all that heat dispersed by the exhaust and turbine itself. One thing that concerns me is that fact that the inlet and outlet of the civic radiator is noticably smaller compared to that of our stock rad. Would this effect coolant flow? Is it worth it? All opinions are greatly appreciated even some negs as so I can see outside the box as well.
Thanks again
Comment