How many pounds per hour are the 1.8bp injectors? and wich other injectors fits on the fuel rail, and obviously on the engine...
Announcement
Collapse
No announcement yet.
Injectors
Collapse
X
-
Tags: None
-
I think the stock injectors are 240cc but I am not sure on that. As far as other injectors fitting, the GTX and GTR injectors are a direct swap. You can also swap any injectors from a 2nd generation RX-7, turbo or non-turbo.-------------------------
'91 LX
'03 Mazdaspeed Protege #235
-------------------------
Originally posted by pigeonwell if you're a fan of inaccuracy and uncertainty.... then by all means, go set your timing by feel and sound
while you're out there, you might as well adjust your air/fuel ratio by smell... and your tire pressure by ride height
-
Something close to that. When mine were rebuilt by RC, they flow tested at about 245cc, IIRC. According to the Marren Motorsports site (injector.com), that works out to be a little less than 24lb/hr.David Avard
'90 Protege LX (STS-prepped)
'89 Civic Si (STS-prepped)
'02 Altima SE (14.164 @ 97.7mph stock)
Comment
Comment