I have a GTR motor in a ford festiva, and it won't run. HA. Well, it is not getting fuel. If I put raw gas in the intake it runs, until the fuel runs out? it has fire but no fuel. How can I get fuel to my motor?!
Announcement
Collapse
No announcement yet.
GTR Won't run
Collapse
X
-
Fuel pump works great, it is loud when it is on. Here is my issue, the motor ran great before I pulled it out, i started it in the front clip. I am running the stock computer. Now, I have noticed that it is a return fuel system. When I had it hooked up in the front clip, i used the stock festiva fuel pump to start it up, and run it. Now I have a 255 fuel pump installed and there isn't any fuel returning out of the return line? Is it possible I have too much fuel pressure for the stock fuel pressure regulator? It's hard to belive my injectors have gotten dirty from sitting for a year. My next step was to get an adjustable fuel pressure regulator, then get my injectors cleaned. If it was my wireing, it wouldn't run at all when I give it fuel right? If it is, how do I test if the injectors ar wired correct?http://www.cardomain.com/memberpage/708975
Comment
-
If I can't get this to work, I'm going to get a megasquirt, + fuel pressure regulatror.
Last edited by 88FESTIVAGTR; 01-28-2006, 03:41 PM.http://www.cardomain.com/memberpage/708975
Comment
-
all the luck man, btw, you should post some more pics since your cardomain page is down
JACK-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
-
I am running the gtr harness and ecu.
Here is a pic of how I have the fuel flow hooked up, follow the Arrows, Is this right? I'll try and switch them this evening to see if it makes a difference.
here is a pic of the regulator. Fuel should be comming out of this, not into it correct? I'll try it tonight. This is all I lack. I know it runs. Damn!!!WTF?http://www.cardomain.com/memberpage/708975
Comment
-
not the *small* hole in the firewall for the intake manifold... lol, that GTR is crammed in there.... badass project though.
oh and I am sure you removed the PCV valve and line for just the picture
What injectors are those? I didnt realize GTR injectors are yellow.?.? If those are high impedance injectors thats your problem b/c the GTR uses low impedance signals. I ran into this same problem... I bought some 460cc injectors and got low impedance ones... luckily I will be running Megasquirt so low or high doesnt matter for me.
Comment
-
that festiva is damn sexy. traction will be an issue tho.---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
Comment