ZX2 lower control arms same as EGT?

[Lex]

Buying some LCA bushings for my 91 EGT and wanted to double check if the ZX2 has the same LCAs dimension wise so that I can buy bushings from the ZX2.

Also are the front swaybar bushings and endlinks the same as the EGT? I know the swaybar itself on the ZX2 is thicker, but what about the endlinks?

[rusty]

the whole zx2 hyperflex kit will work except for the rear sway bar. I have installed 3 zx2 kits on 2nd gens so far. Do you have access to a press to press the old ones out and new in?

[aliennation95gt]

i used a gear puller on mine, and you can get the new ones in easy, the sway bar is bigger up front on a zx2, but the rear is bigger on a egt. we did the swap takes us around 1-2 hours for 2 of us!

[Lex]

Great info, thanks. The hperflex kit is a little steep at $100 on ebay though. I was just thinking of getting the LCAs since I already have poly endlinks on the rear swaybar.

How much of an improvement does the whole kit create?

[Turpro]

yea the only thing i didnt use from my zx2 es hyper flex kit was the sway bar bushings. my suspension feels very tight now.it was a good investment. i do warn you though, if you live in a rough road hell hole like me,i had to relearn the road and the danger spots.

[Lex]

is it that much harsher with the poly bushings? I plan on keeping the 15 inch wheels for the extra rubber comfort

[MazdaRacer]

Well, i have super stiff springs, but i could still feel a difference in road feel after doing all the poly bushings. I would say it would still add enough of a difference to notice it on a street set up.

[rusty]

Too me it was really worth doing the full swap. A hyperflex kit for $100 is very cheap. If you were to compare to other kit prices. Most are usually closer to $175 or better. If you do the full kit and get the motor mount inserts as well. It is very nice.

[Turpro]

is it that much harsher with the poly bushings? I plan on keeping the 15 inch wheels for the extra rubber comfort

well with 15s its not going to be as harsh as mine because i run 16s. but it will be stiff.what size tires are you running?

[Lex]

Im running big 60 series rubber right now

[rusty]

I am running 215/40/17's on mine with R1 coilovers and zx2 sr struts, plus manual steering rack. Every possible ES bushing for the zx2, plus the 21mm rsb and bushings. The suspension is a little harsh. Yet it will take just about any turn you will throw at it.