Announcement

Collapse
No announcement yet.

starting trouble

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    starting trouble

    this is a piss off, i changed out a bad starter a few weeks ago and no problem with the car starting after that, this mornign i went out turned the key and nothing happened...

    it was freezing rain then turned to rain +8degrees this morning after ****ing with it, turnign the key alot it finally started and got me to work, it started fine all day and all night

    when i turned the key it sounded like if you were to turn the key without pressing the clutch, just that electrical humm

    i assume its my clutch/neutral switch or what ever you call it, does anyone know where it is and how i could check it to see if its working properly?

    does anyone have any other ideas to what might be failing in my car?

    thanks
    No more protege, Mx-3 now...Only known BP powered Mx-3 in Nova Scotia


    #2
    double check all starter, battery, and etc to make sure the connections are good and tight.

    It could be the clutch switch or possibly the ignition key cylinder itself.

    Comment


      #3
      I believe zenilder told me that these cars sometimes have problems with the ignition key cylinder, and he had a similar problem... hopefully he will post here.
      2006 Mazda 3 hatchback manual

      Comment

      Working...
      X