Announcement

Collapse
No announcement yet.

interchange info.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    interchange info.

    I searched around this site for a while, and also the internet, but couldn't find much information for what is interchangable between an escort and a protege. Most importantly a 96 protege. I live in Alaska and there just aren't that many protege's around but there are tons of escorts. So if I'm looking for used parts I'm out of luck and if I want new then it costs a load to get them here. Right now I'm just mainly interested in the suspension and brakes, but after that I'll move on untill I cover most of the car. Thanks for any help on this.

    #2
    not sure, but i can tell you that a 1995 ford aspire mass air flow sensor is the same as the one's on our cars.

    Comment


      #3
      im probly wrong but i dont know much is the same. the escort was on the bg chassis first gen. while yours is based on a different chassis.
      mods: engine: fm stroker lightened and knifedged crank, 11:1, custom crank scraper, fully p&p head and intake mani, bored throttle body, flowed and matched stock injectors, rx7 vaf, apexi safc, gude race cams, modded ecu 8200 fuel cutoff, blaster coil, clutchmasters stage 3 clutch, fidanza fly wheel and timeing gears, msp diff, custom shortram in a cold air box

      suspension: s/r struts intrack springs and intrax sway bars 15x6.5 rims kumho mx tires 205 50 r 15

      Comment


        #4
        I can tell you my front and rear cross-drilled rotors were labeled Protege-MX3-Escort
        98 protege lx 1.8l
        short ram intake custom
        crane hi-6 ign.
        14 miata alloy wheels
        .50 over pistons and some other tricks .

        my protege

        Comment


          #5
          same here, i got the powerstop ones... same thing with my ebc greenstuff brake pads.

          someone should make a 2nd gen factory swapable parts guide.

          Comment


            #6
            escort-contour-2nd gen protege's use the same strut mount up front. not too sure about the rears.
            Almost there

            jdm tails... check
            jdm bumper... check
            ms lip... check
            ms grill... check
            ms sideskirts... check
            ms rear skirts... check
            ms spoiler... check
            ms struts... check

            Still trying for a bp swap..:
            Fidanzda 8lb flywheel, ACT HD00, UR Crank Pulley, UR Adj. Cam-Gears, Exh-Intake CamShaft Swap, MS Engine Mounts, Custom CAI, PaceSetter Header, 2.25" in/out-let Magnaflow Cat, 2.25" Mandrel-Bent Exhaust.

            Comment

            Working...
            X