Announcement

Collapse
No announcement yet.

Tach install-distributorless ignition

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tach install-distributorless ignition

    I couldn't find this on the site, and I have had many people ask about it soI posted it.
    Install of after market tach on Coil on Plug or distributorless ignition:
    after connecting the power (red), ground (black), and light (white) wires, run the green sender wire through the firewall to the diagnositcs port in the upper driver's side of the engine bay. In there you will find a purple and white striped wire, that is the tach out wire for engine testing. simply splice the green tach wire into the purple and white wire. it's that easy.
    (I used my autometer manual for wire colors, they may vary)
    Shaun
    01 MP3
    98 civic (stock)
Working...
X