Announcement

Collapse
No announcement yet.

Used parts for the taking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Used parts for the taking

    Help me clean some of the crap out of my garage. It's all stock parts most are from a 94 DX. They are old and not worth anything, but since I have to put a price $5. For local pickup only these parts are not worth the cost of shipping. Help me get rid of this stuff. I live in Canton georgia, PM for the address. Some of these these pics were taken a while back as you can tell from the date on the paper, but I got lazy never and made the post.
    GTX front Spindles-Repainted w/ dust shield removed



    Rear DX brake parts; spindles with TTLs attached


    Front DX brake parts; calipers, rotors, and spindles

    Old Struts that I thought I threw away in the move


    I think I also have the stock springs to go along with the struts. I know this is old used stuff and hence why I'm not really asking for any money except for the wheel/tires. The $5 is just to have a price so I place the ad. I alos have the a GTX propo valve, DX propo valve, and some random LX caliper bits.
    Last edited by Silentbob343; 07-10-2006, 08:25 PM.
    2005 Mazda 3

    #2
    should post this in the freebie section.
    c+p>c<c+d1>c+p<m+d2>m<m+f>f<c+p>m<m+f>f<f+s1>c+p<c +s2>c<c+p>

    2002 Mazda Protégé 5 , 5-speed , poly engine mounts , 4 to 1 header , JIC-Magic semi titanium cat back , custom CAI , Tokiko hp struts , Vogtland springs , Mazdaspeed sway-bar kit , Megan racing TTL's , Megan Racing trailing arms , pedders control arm bushings , corksport clutch line and shifter bushings , Tiger Tuning rear panel with V brace , Black sedan headlights with 6000k H.I.D.'s , M3 mirrors , Audio by Alpine , Kicker and just getting started.

    Comment


      #3
      moved to freebie section
      ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

      1992- project FE3..... 313 WHP @ 9.3psi




      I pet my dash when I get into the car..."good car"
      he actually has a mazda tree, parts grow on it

      Comment


        #4
        BG8Z GTX spindles? Aren't they the same as the FWD ones? If not what's the difference?

        Comment


          #5
          I got these spindles from thegreatelbobo, who took them off a GTX front clip IIRC. They do not work with the protege as the boss for the tierods is in a different location.

          Sarge posted a good set of pictures in this thread:
          2005 Mazda 3

          Comment


            #6
            dx ttl's same as lx ttl's same as egt ttl?
            mods: engine: fm stroker lightened and knifedged crank, 11:1, custom crank scraper, fully p&p head and intake mani, bored throttle body, flowed and matched stock injectors, rx7 vaf, apexi safc, gude race cams, modded ecu 8200 fuel cutoff, blaster coil, clutchmasters stage 3 clutch, fidanza fly wheel and timeing gears, msp diff, custom shortram in a cold air box

            suspension: s/r struts intrack springs and intrax sway bars 15x6.5 rims kumho mx tires 205 50 r 15

            Comment


              #7
              Originally posted by Silentbob343
              I got these spindles from thegreatelbobo, who took them off a GTX front clip IIRC. They do not work with the protege as the boss for the tierods is in a different location.

              Sarge posted a good set of pictures in this thread:
              http://www.wihandyman.com/forum/show...light=spindles
              1st or 2nd gen GTX?
              BFMR or BG8Z?
              1986-89 or 1990-94?

              From the link it looks like they're BG.
              Would you ship them?

              Comment


                #8
                Originally posted by escortkid
                dx ttl's same as lx ttl's same as egt ttl?
                Couldn't say for certain about the DX TTLs=EGT TTLs, but I'm pretty sure DX=LX.
                1st or 2nd gen GTX?
                BFMR or BG8Z?
                1986-89 or 1990-94?
                You'll have to ask thegreatelbobo what year they were from.
                Last edited by Silentbob343; 07-11-2006, 10:21 PM.
                2005 Mazda 3

                Comment


                  #9
                  they were 89-94 bg8z spindles... & yes the TTL's are the same.
                  ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                  1992- project FE3..... 313 WHP @ 9.3psi




                  I pet my dash when I get into the car..."good car"
                  he actually has a mazda tree, parts grow on it

                  Comment


                    #10
                    Originally posted by Silentbob343
                    Couldn't say for certain about the DX TTLs=EGT TTLs, but I'm pretty sure DX=LX.

                    You'll have to ask thegreatelbobo what year they were from.

                    Again, I don't know and don't know how to find out.



                    Me VBGarage HERE

                    "90% of young people that get into car accidents say "OH ****". The other 10% are from Wisconsin and say "Hold my beer and watch this!".

                    Comment


                      #11
                      how much for ttl's to 74008
                      mods: engine: fm stroker lightened and knifedged crank, 11:1, custom crank scraper, fully p&p head and intake mani, bored throttle body, flowed and matched stock injectors, rx7 vaf, apexi safc, gude race cams, modded ecu 8200 fuel cutoff, blaster coil, clutchmasters stage 3 clutch, fidanza fly wheel and timeing gears, msp diff, custom shortram in a cold air box

                      suspension: s/r struts intrack springs and intrax sway bars 15x6.5 rims kumho mx tires 205 50 r 15

                      Comment


                        #12
                        Originally posted by escortkid
                        how much for ttl's to 74008
                        lol first I'll have to see if I can seperate the TTLs from the knuckles. I plan on trying sometime this weekend as thegreatelbob wants the bolts and washers that attach the TTLs to the spindles.
                        2005 Mazda 3

                        Comment


                          #13
                          Originally posted by Silentbob343
                          lol first I'll have to see if I can seperate the TTLs from the knuckles. I plan on trying sometime this weekend as thegreatelbob wants the bolts and washers that attach the TTLs to the spindles.

                          I should take pictures of my bolts........scary



                          Me VBGarage HERE

                          "90% of young people that get into car accidents say "OH ****". The other 10% are from Wisconsin and say "Hold my beer and watch this!".

                          Comment


                            #14
                            Originally posted by thegreatelbobo
                            I should take pictures of my bolts........scary
                            Are the bolts that go from the TTLs to the rear subframe the same as the bolts that go to the knuckles? I think I have some spares of those in my tool box.
                            2005 Mazda 3

                            Comment


                              #15
                              OK so I got the bolts out of the TTLs/knuckles using only a 15" breaker and a regular hammer. I know I'm shocked as well.

                              So the TTLs and bolts can be shipped and sold seperatley. I'll post up some pics of them in a minute or so. Ok one of bolts got mushroomed so I cut off 4mm from the end and it threads fine. I screwed up the nut trying to thread it on the mushroomed bolt, so I'll include a brand new nut, but it doesn't have the washerlike end on it, just a standard nut. You'll see in the pics.
                              See the shiny new silver nut, blurry picture I know, but you get the point. The other bolt could use a good chasing to removing the corroision and could also do with a new nut. I can include another one, but it would be like the other new nut. Nuts are Grade 8.


                              A set of TTLs, free from the spindle:


                              List of parts that are pending:
                              Rear Springs
                              TTL bolts & washers
                              TTLs
                              Last edited by Silentbob343; 07-16-2006, 09:01 PM.
                              2005 Mazda 3

                              Comment

                              Working...
                              X