New Kits By Essential Speed for 2.0

[markmurray77]

https://www.essentialspeed.com

STAGE 1AUTO: NON-INTERCOOLED 6-8PSI+ "DESIGN CHANGES"

COMPONENT LIST;
304 SS TURBO HEADER (CERAMIC COATED)
304 SS DOWNPIPE (CERAMIC COATED)C/W HI-FLOW REPLACEMENT CAT

**ALSO INCLUDES THE MUCH NEEDED EGR FITTING BUNG**

TEO4H TURBO- WATER AND OIL COOLED
ALL LINES NEEDED FOR INSTALL.
CHARGE PIPE TO THROTTLE BODY
CAI. FOR THE TURBO INTAKE(FENDER LOCATION) C/W FILTER
ALL SILICONE COUPLINGS AND GEAR CLAMPS NEEDED.
VORTECH FMU.
ESSENTIAL SPEED'S O2 MODIFIER
COST;
2,595.00US DOLLARS PLUS SHIPPING AND HANDLING
-----------------------------------------------------------------------------
STAGE 1 5SPD ** SAME AS ABOVE**
BUT WITH HKS B.O.V -C/W RECIRULATING HOSES
COST;
2895.00 US DOLLARS PLUS SHIPPING AND HANDLING
------------------------------------------------------------------------------------

STAGE 2
ALL OF THE ABOVE ITEMS IN STAGE 1 5SPD,PLUS**
FMIC AND ALL PIPING NEEDED.
SILICONE COUPLINGS AND GEAR CLAMPS
38MM TIAL WASTEGATE(8PSI SPRING) C/W DUMP TUBE.

3,995.00 US PLUS SHIPPING AND HANDLING

AVAILIABLE OPTIONS: IN US DOLLARS
POWDER COATING ALL INTERCOOLER PIPING...200.00

CERAMIC COATING:
TURBO BACK HOUSE ..100.00
INTERCOOLER PIPING...250.00
POLISHED TURBO FRONT HOUSE......100.00
TURBO UPGRADE.................................250.00

[Rider69]

Link not working

[markmurray77]

Just checked and it worked fine for me

[Rider69]

Works fine, must have been a problem with the server before.

[turboge]

Is this a sale advertisment?

[markmurray77]

No iys not really a sale advertisment just a notice of some new products from a local company. They made some improvements to their existing line

[StuttersC]

Is 6-8 psi non-intercooled a good idea with T04H?

I don't think so, but that's just MHO...

[markmurray77]

I ran 6psi non intercooled for about 6 months with no problems on a Te04h. Its a fairly small turbo which works really well. I have no problems running 10psi with it but it is now intercooled.

[turboge]

Mark could you please start another thread titled "Essential Speed MSP Info" and list all of the mods and everything for the 249whp MSP you guys have?

Thanks!

[markmurray77]

I believe they offer hard pipes with a HKS BOV reircultaing, FCD, CAI, FMIC boost controller and a mid pipe so far. You may just want to call them and ask for Kevin he can fill you in on everything.