i have one, but i don't know much about it.
I really hated the car at first.
in the first 4 weeks it was in shop 4 times! overheating, bad wires,etc.
but it was only small things.
since then the car has been running awesome. I drive it pretty hard.
I am amazed at how well it drives on the local backroads.
I even got second in my first autocross event! with a blown shock and almost no clutch.
I still have those 2 problems
they knda slow me down at times, but the car itself drives very neutral, has decent power and the short wheelbase is great.
I didnt plan on keeping the car at all. But now I started to like it and wanted to start a little project with it.
mostly i wanna do suspension mods and some engine.
but i wanted some specs.
weight,
engine specs. I oot the basics, 127HP BP-ZE.
but how can i make it perform better, what cheap oem alternatives are there for pistons,etc. and other internals. as im under the impression that the miata shares the same engine.
it will most likely be a 2k$ project.
i dont wanna go drastic or anything.
how much is decent aftermarket and flywheel assembly?
engine specs?
- compression
- iron/alu block
- other facts
vehicle weight?
- what companies offer suspension parts, from shocks, to braces and swaybars, etc.
- who makes engine stuff.
- the usual bolt ons, intake, exhaust, headers, etc.
etc. etc. anything you guys can come up with that will help me make it a nice backroad and autocross car.
I really hated the car at first.
in the first 4 weeks it was in shop 4 times! overheating, bad wires,etc.
but it was only small things.
since then the car has been running awesome. I drive it pretty hard.
I am amazed at how well it drives on the local backroads.
I even got second in my first autocross event! with a blown shock and almost no clutch.
I still have those 2 problems
they knda slow me down at times, but the car itself drives very neutral, has decent power and the short wheelbase is great.
I didnt plan on keeping the car at all. But now I started to like it and wanted to start a little project with it.
mostly i wanna do suspension mods and some engine.
but i wanted some specs.
weight,
engine specs. I oot the basics, 127HP BP-ZE.
but how can i make it perform better, what cheap oem alternatives are there for pistons,etc. and other internals. as im under the impression that the miata shares the same engine.
it will most likely be a 2k$ project.
i dont wanna go drastic or anything.
how much is decent aftermarket and flywheel assembly?
engine specs?
- compression
- iron/alu block
- other facts
vehicle weight?
- what companies offer suspension parts, from shocks, to braces and swaybars, etc.
- who makes engine stuff.
- the usual bolt ons, intake, exhaust, headers, etc.
etc. etc. anything you guys can come up with that will help me make it a nice backroad and autocross car.
Comment