Well, on wednesday, was at the track and got in a bunch of runs (14 plus i think) and everything held together nicely, best time was a 12.97@115 on street tires! went back on friday night and on the second run, didn't even get a chance to mount the new slicks, Pop went the tranny shifting from 2nd to 3rd again! In conclusion, The kia tranny is just about as strong as my previous two trannys, (f series north american and g series from japan) which imo, wern't too strong. now i'm left bummed out and looking yet again, for another gearbox!. Popping it out tomorrow, will post pics if i find anything interesting.
Announcement
Collapse
No announcement yet.
Kia tranny review, it blew too!
Collapse
X
-
sucks too hear, if it turns out to be the diff pin that is a known issue with all the mazda trannys, quite a few people have welded them, there is a PR kid who just posted an 11 second pass using the kia tranny (IIRC) maybe ask him what he did differently.
good luck getting it all back together, and BTW nice time slip in the other thread!"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
-
yeah
thats a needed.---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Originally posted by MazdaTGTSThat is notorious of all Mazda trannies. The diff pin get loose and bye bye tranny. The first thing you have to do is to weld the diff pin to avoid this inconvenience.
But the Kia tranny is the strongest. I don’t have any problems since I install that tranny.
actually the diff pin didn't let go, it's all intact but one of the spider gears blew up and the other one lost all of it's teeth.
Comment
-
well that is secondary to go after the pinionshaft itself. LSD is the only cure for this disease---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
whats the running cost of an LSD?My Car Domain
My VB Garage
1994 Protege LX
Cold Air Intake
Cat Back Exhaust
5 Speed Tranny Conversion.....Coming This Summer
Comment
-
Yeah LSD. My box is pretty mint now. And with a PAR Straight cut 3rd gear its tops (and sounds good).
Otherwise just weld the diff as a locker.1987 Ford Laser TX3 4WD with BPT FWD LSD
GT2876R, Turbosmart Ultragate, Weisco Forged Pistons, GTR Conrods, Race Flowed Head, HPC Tube Manifold, GTR Plenum, 550cc RX7 Injectors, Custom Fuel Rail, Infini LSD Diff, Straight Cut PAR 3rd Gear, FMIC, 4" Intake etc.
320HP at 24psi Pump Fuel & 12.5 @ 122mph Street Tyres
Comment
Comment