All right guys everything must go before January! All prices listed below are shipped, aside from larger items requiring freight or bigger shipping costs.
1st Gen Stuff
Complete BP Engine Swap
94 BP (120k) w/ 95 Miata Head (4k)
Head is Ported and Polished w/ a 3-angle valve job
I've also installed heavy duty valve springs for 8500rpm
The intake manifold has been port matched and polished as well
I've also installed ARP Head Studs and a new Mazda Headgasket
Motor has the PaceSetter ceramic coated header on it
94 Escort GT Transmission (130k) w/ BRAND NEW axles
Used redline fluids, shifts perfect
ACT Z62-HDSS clutch kit installed currently on OEM flywheel (4k)
Front and side MM Motor mounts filled, also filled side mounts
94 Protege ECU included (waiting on harness)
Also have shift linkage, front brakes, master/slave cylinders
Two factory radiators, cooling fans, misc parts included
Rear Swaybar as well.
Would like to sell that complete but will part out if enough of it has commited buyers, PM for details. Asking $1000 + shipping or pickup.
Misc. Parts / Electronics
Haltech E6K setup for a Mazdaspeed Protege
This can be used on any car, but has been setup for an MSP
Includes trimmed flying lead, 2 or 3 bar MAP sensor, coolant temp sensor, relays, fuse panel, instructions, RA8 reluctor adapter, wiring guide, software and serial cable. $1100
RC Engineering 440cc Injectors w/ Connectors
These were used 215 miles and pulled out to tune stock injectors. Includes 4 new connectors ($16 value) , an awesome upgrade for anyone using engine management or piggy backs on a turbo motor. $300
91 RX-7 460cc Drop in Injectors
These will bolt into any GTX or BP motor, as well as 3rd gen FS motors or anything using the same style injector. Tested to work and pulled afterwards. Also a great and cheaper upgrade if you don't want to pay extra for the B&B RC's. $120
J&S Safeguard Knock Controller
For use with any RX-7 or toyota MR2 (requires reprogram for MR2)
I picked up this unit on accident thinking I could use it, little did I know it was the wrong model.. so my loss your gain. This includes the base unit valued at $450, the optional Bosch Knock sensor valued at $75 and the Dual Monitor Gauge (square) valuved at $199. All of this for $400.
All of it has to GO! E-mail me at bltspecv@socal.rr.com or PM me for more information. Thank you!
1st Gen Stuff
Complete BP Engine Swap
94 BP (120k) w/ 95 Miata Head (4k)
Head is Ported and Polished w/ a 3-angle valve job
I've also installed heavy duty valve springs for 8500rpm
The intake manifold has been port matched and polished as well
I've also installed ARP Head Studs and a new Mazda Headgasket
Motor has the PaceSetter ceramic coated header on it
94 Escort GT Transmission (130k) w/ BRAND NEW axles
Used redline fluids, shifts perfect
ACT Z62-HDSS clutch kit installed currently on OEM flywheel (4k)
Front and side MM Motor mounts filled, also filled side mounts
94 Protege ECU included (waiting on harness)
Also have shift linkage, front brakes, master/slave cylinders
Two factory radiators, cooling fans, misc parts included
Rear Swaybar as well.
Would like to sell that complete but will part out if enough of it has commited buyers, PM for details. Asking $1000 + shipping or pickup.
Misc. Parts / Electronics
Haltech E6K setup for a Mazdaspeed Protege
This can be used on any car, but has been setup for an MSP
Includes trimmed flying lead, 2 or 3 bar MAP sensor, coolant temp sensor, relays, fuse panel, instructions, RA8 reluctor adapter, wiring guide, software and serial cable. $1100
RC Engineering 440cc Injectors w/ Connectors
These were used 215 miles and pulled out to tune stock injectors. Includes 4 new connectors ($16 value) , an awesome upgrade for anyone using engine management or piggy backs on a turbo motor. $300
91 RX-7 460cc Drop in Injectors
These will bolt into any GTX or BP motor, as well as 3rd gen FS motors or anything using the same style injector. Tested to work and pulled afterwards. Also a great and cheaper upgrade if you don't want to pay extra for the B&B RC's. $120
J&S Safeguard Knock Controller
For use with any RX-7 or toyota MR2 (requires reprogram for MR2)
I picked up this unit on accident thinking I could use it, little did I know it was the wrong model.. so my loss your gain. This includes the base unit valued at $450, the optional Bosch Knock sensor valued at $75 and the Dual Monitor Gauge (square) valuved at $199. All of this for $400.
All of it has to GO! E-mail me at bltspecv@socal.rr.com or PM me for more information. Thank you!
Comment