Announcement

Collapse
No announcement yet.

PRM Intake, WTF!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    PRM Intake, WTF!!

    Ok, so my friend ordered a PRM intake for his protege, the directions on his system said for a 93-97 MX-3, Now i didnt have my car around and I didnt remember if his looks the same as mine. We tried to fit it but it didnt fit quite right. Are they supposed to be the same system? He has a 92 LX. Thanks
    Eat ****.

    #2
    yeah, they don't make one for the Protege, but the MX3 has a similar engine bay. It should fit up nicely.

    BTW: get a ebay intake for a 99-02 protege5 / mp3. They are like $50 shipped and are the same, if not better than the PRM intake.
    93' Noble Green MX-ZE (sold )
    02' Graphite Grey WRX Stage 4, 286whp
    05' Pontiac Vibe daily driver, lowered/tinted/rims

    Comment


      #3
      errr.. don't the PRM intakes require some coolant bottle moveage or something? i was under that impression for any cold air extension... or you talking just an intake pipe? anywho
      peace

      Comment


        #4
        you order the one for the escort, not the MX-3.
        "Never run out of real estate, traction & ideas at the same time"
        -93 MR2, 129 ES
        ClubProtege.com Tech Articles

        Originally posted by WTF
        Remember low compression makes more space for AIR, HEEELLOOOO!

        Comment


          #5
          I ordered the One for the Protege, and they sent me the one for the mx-3. I was just wondering if the mx-3 and protege are the same.
          Eat ****.

          Comment


            #6
            i'm tired, i'm confused, but i can say the mx-3 intake is similar, but NOT THE SAME as a protege... return the damn thing, get your money back and .. buy something nice for your girlfriend/wife/stalk victim
            peace

            Comment


              #7
              well this is the only pic that i have in the house and its to ****ing cold to even think about taking any to night soooooo, try and use this as a guide you can see the mounting points.

              thisis a 91 323 so its should mount the same on the pro. butt i have no idea what to tell you it you PRM kits is for the MX-3 im not fimilar with the car.
              good luck
              Attached Files
              Koroma
              91 323BG-----------------------
              Intax springs,PRM Air Intake
              ST Swaybars, Front upperstrut bar, 15' Prime, Advanced Timing, 2.25 inch-Cat back, Flowmaster, Indiglo gauges, Custom Taillight config

              Next Stage
              J-SPEC GTX kit,Brembo Brake Kit

              Comment

              Working...
              X