Have everything pulled from 91 EGT, I have a complete GTR harness AWD tranny (which I will put up this week), ic, ecu etc. Well the wiring for the GTR harness seems ALOT shorter for one and per the pics below the wiring to my escort is different inside the car. I am not sure how to wire the NA harness to the knock sensor and FI resistor box.... also in this list is the solenoid differences that the BP doesn't have. Any idea's? I guess I can use the GTR harness if it is easier if someone knows how to mate it with the egt wiring. This is my only setback.. Thanks
-Steve
This is the pic of the GTR plug that does not match the EGT's, along with the correct color codes for that plug according to the service manual.
And these are the plugs inside the Escort that are different.
And finally the NA harness differences found on feoa that came from here originally.
Someone has to know a way to do this. I have got to get this out of my driveway.
-Steve
This is the pic of the GTR plug that does not match the EGT's, along with the correct color codes for that plug according to the service manual.
And these are the plugs inside the Escort that are different.
And finally the NA harness differences found on feoa that came from here originally.
Someone has to know a way to do this. I have got to get this out of my driveway.
Comment