If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
no it wont plug and play... the only way it will is if you swap out the whole dash harness and the front harness in the engine bay (headlights and all that). the fuse box and rear harness can stay as far as i know.
-jon
Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA! Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
so what do i need to make my 91 bp-t fit in a 93 1.9 escort lx???i got to scrap the bp-t swap into my 97pro....just wont work. so i bought a wicked shaped escort for 100bucks it doesnt have a motoror trans.
well if you like wiring... you can repin things to get it to work with the original 1.9 dash harness. sarge is running his BPT wagon with the original dash harness. OR you can remove the dash and swap out that whole harness, and the harness leading to the front of the car, for one from an EGT or protege
-jon
Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA! Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
I have a LHD GTX harness that i bought when i was planning on doing the BP-t swap into my 2nd gen. I'm no longer going ahead with the swap. I paid $200 for it. PM me if you're interested. I'm in Charlottetown btw.
Comment