Hey guys...
lately a cool company that I often deal with just bought a nice CNC plasma cutter. So I have decided that I will now offer a flange cutting service for all your exhaust, turbo, engine, whatever flange.
Readily available materials are:
-Mild steel (good for most flanges)
-Stainless steel (good for most flanges, an upgrade from mild steel)
-Aluminum (good for intercooler piping flanges)
Other materials available on demand but delay might be bigger and some material may not be available or possible to be cut.
Thickness vary from very thin sheetmetal to 1" thick.
To have a flange cut I need a drawing. I can send out any 2D Autocad drawings to be cut or I can re-draw your sketch with Autocad and sent it out to be cut.
I already have some BP and BPT flanges readily available (meaning I have the drawings ready to be sent to be cut) :
- VJ-20 downpipe flange
- VJ-20 turbo inlet flange
- Any sized you want 3 bolt exhaust flanges
I also have various BP gaskets here that I could draw in Autocad and send out to be cut for all your turbo exhaust manifold or custom intake manifold projects.
Finally, anything that can be made from a 1" metal plate and thinner, I can have it cut, don't be shy to ask!
Here are some examples of some flanges I sold to friends/customers:
VJ-20 downpipe flange that some of you here already have:
Turbo outlet flange for RX-7 Turbo:
FS-DE (3rd gen Protegé 2 litre) engine flange for custom turbo manifold. This one is stainless 304, 1/2" thick:
lately a cool company that I often deal with just bought a nice CNC plasma cutter. So I have decided that I will now offer a flange cutting service for all your exhaust, turbo, engine, whatever flange.
Readily available materials are:
-Mild steel (good for most flanges)
-Stainless steel (good for most flanges, an upgrade from mild steel)
-Aluminum (good for intercooler piping flanges)
Other materials available on demand but delay might be bigger and some material may not be available or possible to be cut.
Thickness vary from very thin sheetmetal to 1" thick.
To have a flange cut I need a drawing. I can send out any 2D Autocad drawings to be cut or I can re-draw your sketch with Autocad and sent it out to be cut.
I already have some BP and BPT flanges readily available (meaning I have the drawings ready to be sent to be cut) :
- VJ-20 downpipe flange
- VJ-20 turbo inlet flange
- Any sized you want 3 bolt exhaust flanges
I also have various BP gaskets here that I could draw in Autocad and send out to be cut for all your turbo exhaust manifold or custom intake manifold projects.
Finally, anything that can be made from a 1" metal plate and thinner, I can have it cut, don't be shy to ask!
Here are some examples of some flanges I sold to friends/customers:
VJ-20 downpipe flange that some of you here already have:
Turbo outlet flange for RX-7 Turbo:
FS-DE (3rd gen Protegé 2 litre) engine flange for custom turbo manifold. This one is stainless 304, 1/2" thick:
Comment