This is probablly a dumb quetion!!!! BUT when i bought my protege it didnt come with the remote. If i get one off of ebay will they screw me at he dealership to program it for me????
Announcement
Collapse
No announcement yet.
Answer me this!!
Collapse
X
-
Answer me this!!
"mess with the mazda...... mess with the chick......."mazdachic"
I don't go looking for no trouble but somehow the trouble always finds me, Don't make me have you in the trauma center With your momma crying cause her only son is dying, She just don't know it's just your karma catching up cause I'm a Drama SetterTags: None
-
yeah most guys will do it for free, mine did. i dont think you will have any problems getting it done for free......HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
Comment
-
well good too bad u aint close enough!!! I'd let u do it!!! Thanks Guyz for helpin this chic out!!!!"mess with the mazda...... mess with the chick......."mazdachic"
I don't go looking for no trouble but somehow the trouble always finds me, Don't make me have you in the trauma center With your momma crying cause her only son is dying, She just don't know it's just your karma catching up cause I'm a Drama Setter
Comment
-
damn it i wish i was in Tn, lol.....HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
Comment
-
also here is the instructions on how to program them.you can buy the remote from ebay for like 10 bucks.
1. Close all doors.
2. Open drivers side door.
3. Place key in ignition.
4. Next three steps must be done in under 30 seconds.
5. Move key to on and back to lock 3 times.
6. Remove ignition key.
7. Press drivers side door lock button three times.
8. Test the door lock button and make sure they still work.
9. Press any button on the transmitter twice.
If it works then thats it. If not repeat the procedure.....HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
Comment
-
7. Press drivers side door lock button three times.
8. Test the door lock button and make sure they still work.
Just trying to clarify. I've reprogrammed mine before, but don't have the FSM in front of me.-Kevin
-90 Miata 1- #80 CSP, '01 1.8L Swap w/ working VVT
-90 Miata 2 - $2005/6/7 Turbocharged GRM Challenger
-91 Tracer - $2008/9 AWD Converted Turbocharged Challenger
-94 MX3 - #8 Hong Norrth LeMons/Chumpcar Racer
-02.5 Protege5 - The Daily
Comment
-
ok THEMAN WROTE THESE UP.
1. Make sure there are no keys in the ignition and that all doors are closed
2. Open driver's side door
3. Insert key into ignition switch and cycle the key between the ON and LOCK positions 3 times
4. Remove key from ignition switch
5. Push the driver's side door sensor switch 3 times
6. Verify that the doors lock and then unlock.
If nothing happens, wait 40 seconds and start from step 3 again
7. Press any button on any transmitter twice
8. Verify that the doors lock and then unlock
If nothing happens, see note A
9. If you have only 1 remote, press any button on that remote twice.
If you have 2 or 3 remotes, press any button on any of the other remotes twice.
10. Verify that the doors lock and then unlock
If nothing happens, see note A
11. If you have 1 or 2 remotes, press any button on either remote twice.
If you have 3 remotes, press any button on the 3rd remote twice.
12. Verify that the doors lock and then unlock
If nothing happens, see note A
13. The codes should now be reprogrammed
Note A:
1. Hold down the driver's side door sensor switch
2. Verify that the doors lock and unlock twice
3. Start from step 3 again
If you start working on 1 remote, finish working with that 1 remote until you're done reprogramming it!!!
This was all written by THEMAN, so thank him, i'm just the one who found it, hope it works......HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
Comment
-
Originally posted by THEGOLDPRO
ok THEMAN WROTE THESE UP.
1. Make sure there are no keys in the ignition and that all doors are closed
2. Open driver's side door
3. Insert key into ignition switch and cycle the key between the ON and LOCK positions 3 times
4. Remove key from ignition switch
5. Push the driver's side door sensor switch 3 times
6. Verify that the doors lock and then unlock.
If nothing happens, wait 40 seconds and start from step 3 again
7. Press any button on any transmitter twice
8. Verify that the doors lock and then unlock
If nothing happens, see note A
9. If you have only 1 remote, press any button on that remote twice.
If you have 2 or 3 remotes, press any button on any of the other remotes twice.
10. Verify that the doors lock and then unlock
If nothing happens, see note A
11. If you have 1 or 2 remotes, press any button on either remote twice.
If you have 3 remotes, press any button on the 3rd remote twice.
12. Verify that the doors lock and then unlock
If nothing happens, see note A
13. The codes should now be reprogrammed
Note A:
1. Hold down the driver's side door sensor switch
2. Verify that the doors lock and unlock twice
3. Start from step 3 again
If you start working on 1 remote, finish working with that 1 remote until you're done reprogramming it!!!
This was all written by THEMAN, so thank him, i'm just the one who found it, hope it works.-Kevin
-90 Miata 1- #80 CSP, '01 1.8L Swap w/ working VVT
-90 Miata 2 - $2005/6/7 Turbocharged GRM Challenger
-91 Tracer - $2008/9 AWD Converted Turbocharged Challenger
-94 MX3 - #8 Hong Norrth LeMons/Chumpcar Racer
-02.5 Protege5 - The Daily
Comment
-
Hey Mazdachic! I live in TN, {when I get back from Iraq end of Feb} if you need help, wanna compare car notes or whatever I also do some custom stuff 7 work on cars. Drop me an e-mail.
germanwolf@charter.net I live in Clarksville. Plus a little after I get back I'll be on leave for a month 7 have plenty of time to do stuff.It's far better to be hated for who you are, then be loved for who you are not!
Comment
Comment