Shades thread inspired me to do the same for my 1.8 BP. It came out of my $250 beat 94 EGT that I found at the Craft Center in Hanau (I am stationed in Germany). The block is at the machine shop and I need to bring the pistons to him so he can bore the block. I wont have the motor done until spring 2008. I am looking at $7000 in parts. I have an excel sheet that I will post when its done.
Announcement
Collapse
No announcement yet.
The Beginings of a BulletProof Motor
Collapse
X
-
Looks good Shane... why haven't you posted this on ERDT and when are you gonna have me either send you that stuff you had sent to my house or are you gonna get from me when you get it stateside.Yes I am TSME from ERDTOnline = www.erdtonline.com
-
God dam I completely forgot about you and my stuff there, hell I cant even remember what it is, plastic I think. I didnt post this on ERDT or FEOA because I dont think many people would care that much. I feel that this place is more performance orientated than the other sites plus I just started. When I get furthur along I might post it.Block is almost done, cylinders are overboard for Weisco pistons, pro gram billet main caps have been line bored, and my chinese EDT rods have been machined to right specs. Everything has been balanced.
Comment
-
terry, why you have a diff name on clubpro?"Beer is proof that God loves us and wants us to be happy"
-Benjamin Franklin
i wish my grass was emo, then it would cut itself
-dedicated to sling blade, aka, meltdownsky
this is a horrible trick and should be deleted immedately - wheresthericego
Comment
-
I have a different sn b/c I wanted a different one... I know it's confusing I get asked that all the time. Plus I don't post much over here anyways and only the escort peeps know who I am really.Yes I am TSME from ERDTOnline = www.erdtonline.com
Comment
-
Good luck on the build. sub'n to watch the progress.
What comp are thos pistons? What are you aiming for hp wise?
Yea shades has inspired a lot of us, me included.1993 Protege LX-Midnight's shadow SOLD
1996 Honda CBR600-Wrecked. Damn Honda crippled me
2002 mazda MPV-family truckster SOLD
2010 VW routon
Originally posted by jay.....they totally underestimated the number of gearheads such as myself that have families but refuse to grow the hell up and stop playing with cars, or that otherwise see the utility of having 4 doors. Obviously I ain't alone, as there are a helluva lotta sti and evo here. Bueler? Beuler? Mazda? Mazda?
Comment
-
edit* 83.5, so half mm overbore. why so small???---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Originally posted by bpt323 View Postedit* 83.5, so half mm overbore. why so small???
Motor is kind of on the hot plate now, looking at a new BMW 335i. I am keeping the escort though, need to park her to do the next set of upgrades.Block is almost done, cylinders are overboard for Weisco pistons, pro gram billet main caps have been line bored, and my chinese EDT rods have been machined to right specs. Everything has been balanced.
Comment
-
i think your highly mislead with the "meat thickness factor" 1.5mm overbore is max with factory headgasket. It is the safe limit. ask flyin miata. thats what the 2.0 stroker kits run with 400-600---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Did you get those pistons from flyingmiata?. They are the only ones that I know that have the coated wiesco pistons. Im about to buy a set of wiesco's and I dont want to bore my block also cause it has less than 25k on a bp05 block. I just bought brand new GTR rods and need some pistons to build the bottom end.
Comment
-
Your in Germany huh? Are you interested in selling some parts? I need the trim piece around the cluster/ dash area with the manual vents. I have the trim piece abouve the glove box with the manual vents. I also need another trim piece bleow the steering column with the coin pocket.
( A stupid cop broke mine).
PM me with the info. Thanks
Comment
-
Yea I am in Germany but its a US BP block for a US spec escort. I got the pistons from Summit Racing.Block is almost done, cylinders are overboard for Weisco pistons, pro gram billet main caps have been line bored, and my chinese EDT rods have been machined to right specs. Everything has been balanced.
Comment
-
will you be my new daddy?!!??"Beer is proof that God loves us and wants us to be happy"
-Benjamin Franklin
i wish my grass was emo, then it would cut itself
-dedicated to sling blade, aka, meltdownsky
this is a horrible trick and should be deleted immedately - wheresthericego
Comment
Comment