Ok, i searched for this but havent found the answer. Will the 10:1 miata pistons fit right in our engines? Like, I could just crack it open, put the new pistons in, and everything that goes with it, and put it all back together and bam, thats it? Also, where has anyone found them for the best price, rings also..thanks!
Announcement
Collapse
No announcement yet.
Concerining the Miata Pistons?
Collapse
X
-
-------------------------
'91 LX
'03 Mazdaspeed Protege #235
-------------------------
Originally posted by pigeonwell if you're a fan of inaccuracy and uncertainty.... then by all means, go set your timing by feel and sound
while you're out there, you might as well adjust your air/fuel ratio by smell... and your tire pressure by ride height
-
Kevin
heh, if you consider 'rebuilding' your engine BAM.. be in for a LONG weekend. figure on what the engine as a whole.. to install pistons.. the motor would have to come out
peace
Comment
-
Originally posted by skr33t_rac3r
could u maybe stick a miata head on our bp block if u got some custom headers and intake mani made-------------------------
'91 LX
'03 Mazdaspeed Protege #235
-------------------------
Originally posted by pigeonwell if you're a fan of inaccuracy and uncertainty.... then by all means, go set your timing by feel and sound
while you're out there, you might as well adjust your air/fuel ratio by smell... and your tire pressure by ride height
Comment
-
Kevin
-
sheet metal isn't that expensive....learn to weld.
i need to"Never run out of real estate, traction & ideas at the same time"
-93 MR2, 129 ES
ClubProtege.com Tech Articles
Originally posted by WTFRemember low compression makes more space for AIR, HEEELLOOOO!
Comment
Comment