Announcement

Collapse
No announcement yet.

ms2 pcb3 wiring??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    ms2 pcb3 wiring??

    i need some serious help wiring up my ms2 to the stock 91 bp harness...how have yall done this .....i was gonna make a sub harness so i dont have to cut the stock one .

    all u ms users fill me in on how ya did urs

    #2
    i stripped all the tape/plastic off the harness, then traced the wires i needed and marked them, then traced all the wires i DIDNT need and cut them out. then i put new plastic and tape around the harness and spliced the MS connector to the end. voila!
    Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
    ... The first FWD BG with a Toyota E153 transmission conversion in the USA!
    Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts

    Comment


      #3
      Bought the MS wiring harness and got rid of the stock wiring harness...

      Made sure I got all the wiring diagrams for the ecu first.

      JoN - Automotive Machinist Journeyman/Refrigeration Mechanic Journeyman
      Member of MX-3.com
      1996 Mazda MX-3 RS - Creek Blue Mica
      1993 Mazda MX-3 GS SE - Raspberry... RIP


      Racing BP (Project "Blue" Marlin)... Twin Scroll GT3071R, breaking 30psi at the moment!

      "Do it ONCE, do it RIGHT!"

      Comment


        #4
        Originally posted by Shades View Post
        Bought the MS wiring harness and got rid of the stock wiring harness...

        Made sure I got all the wiring diagrams for the ecu first.
        That's what I'm doing to. I did look at splicing it in the the stock harness, but that looks harder than just rewiring everything...but if you still want to do it look here.

        94 Protege LX: HX-35, Megasquit, ect...
        98 Subaru Legacy GT-DD: 1 inch lift, and all the standard N/A stuff.

        Comment

        Working...
        X