Bouncy!

[mx-3_4evr]

I just bought all new kyb struts and I lowered my car with some ground control coilovers for a civic, but it's too bouncy up front. Will the zx2 tokico struts help out? I just need the front ones. maybe tokico hp blues? Or maybe the front springs are too hard? + there is no way to fix my camber on my car. what should I do about my camber problem? I was thinking to drill bigger wholes for the top bolts on the strut/control arm conection, then that way I will be able to move it.

[SpikeDerailed]

http://corksport.com/store/category/53g3/mx3-suspension_misc.html

Front camber kit for MX-3's.

[mx-3_4evr]

is there a cheaper way? lol

[Mazda_Powered]

crash bolts are your best bet. Search around ebay for some. usually called camber bolts, crash bolts, ect.

JACK.

[MX3_GTR]

hey man instead spending all that thinking with the struts get better springs that will stiffen the front. i rec. H&R i have had so many people compliment after they drive my mx. just the sports are amazing would not use anything else. i dont know about your mix and match suspension. but simple GR2 i know not the best. but decent and cheap and sport h&r s work great. they are inexpensive and you would be surprised on the results. trust me.

[MX3_GTR]

oh and your camber problem you could drill the strut holes, bottom though not top, no room for top plus you could get more adj. out of drilling the bottom holes. but i rec. cam bolts also. they are not expensive. can get anywere. got mine from SMYTH parts plus. you cant drill if you do this though. and you will not be able to bring in all the way. but the mx weighs 2350 stock any lightning mods to front at all and you are gold. have already done this. the mx is so light that the little that you can bring in from bolts is enough to prevent premature tire wear. plus being out like that offers serious handling capabilities trust me you will see if you do this.