Help!! I just learned my '95 Tracer LTS is OBD I and not compliant with the standard Ford OBD I engine code readers. Does anybody know who sells engine code readers for my car that are affordable for shade tree mechanics?
Announcement
Collapse
No announcement yet.
Code reader/scanner for 1995 Tracer LTS
Collapse
X
-
there is a procedure to read the codes using nothing but a paperclip and your check engine light... there's gotta be a walkthrough somewhere around here or on the FEOA.net websiteEscort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
-
Originally posted by p_starck View PostDoes anybody know who sells engine code readers for my car that are affordable for shade tree mechanics?
Comment
-
auto zone does it for free on OBD ll set ups and mazda cars including the tracer and escort and othe cars the same have a specific adapter for the scanner. it is a mazda only adapter. im a firestone tech so know what i am talking about. lol. anyway the best way is to bite the bullet and take to shop to read code or just try to figure it out. start with 02 sensor most likely on the BP motor. and i found this out do not have to reset on these cars. once problem is fixed lght will shut off on it self. mazda self adapting lol.
Comment
-
oh and in addition the code auto zone would give you is just that a code. you would still have to find out what the code or codes stand for more time consuming. where as the shop should have a pretty updated scanner and can tell you exactly what the problem is and where. then just fix it your self if by chance light does not go out for some odd reason can always reset ECU by disconnecting the neg. terminal for ten minutes, reset the whole computer and your god damn clock, son of a bitch. lol.
Comment
-
Originally posted by MX3_GTR View Postauto zone does it for free on OBD ll set ups and mazda cars including the tracer and escort and othe cars the same have a specific adapter for the scanner. it is a mazda only adapter. im a firestone tech so know what i am talking about. lol. anyway the best way is to bite the bullet and take to shop to read code or just try to figure it out. start with 02 sensor most likely on the BP motor. and i found this out do not have to reset on these cars. once problem is fixed lght will shut off on it self. mazda self adapting lol.
Comment
-
The AutoZone near me has a regular Actron orange scanner that gives the code and reads out what it is so you get both right away. How do I know? They loan them also. I rented one and had to return it within 30 days. I didn't and was forced to buy it. They then open up a new one so they have two or three available. Ofcourse, that's on OBDII interior ports. They're the same on Mazda, Ford & Nissan. How do I know it's not just Mazda? I also own an old Nissan and it works on there too. You must be talkling about the connector under the hood.
Comment
Comment