I know Jon's has a hole in his beater's in that spot and i just found water the other day in there on my 95. Seems to be coming from the front part of but not sure. I don't see anything obvious. Ideas? I'd like to nip this in the butt ASAP before the car gets cancer!
Announcement
Collapse
No announcement yet.
Source of water in jack holder compartment
Collapse
X
-
my 95 has a puddle there too. i rememebr hearing something about the taillight gasket, or the gasket for the side vents, but ihavent checked it out yet. lemme know if you find anythingEscort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
-
good to know, something else to do this winterEscort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
Comment
-
Originally posted by roymacavoy View Postit is the seal on the tail light. I siliconed the light housing and reinstalled along with sealing the holes on the inside. no more water for me.
either way, should take only an hour to seal everythingsigpic
03 Accord DX: K24/5MT, peasant-spec old man's car
92 240SX: KA/T25, nerd mobile
Comment
-
It just happens my right tail light isn't 100% "straight" as the car apparently got into a small accident that the previous owner didn't mention soooooo its a bit more out on the most outer part of the car which would defiantly be the issue considering you guys mentioned it! So i guess i have to remove the whole light and silicone everything that has to do with that light being mounted and any other holes in that area? Thanks!**SOLD** 93 EGT with more suspension mods then your average riced out civic's # of decals + useless "bling/style/culture" mods! **SOLD**
95 EGT New beater! And gawd damnit shes NOT pink!
Comment
-
Well. After seeing the hole in Jon's beater where the holder USED to be i'm a bit paranoid that "cancer" will set in eventually if i don't fix it soon!**SOLD** 93 EGT with more suspension mods then your average riced out civic's # of decals + useless "bling/style/culture" mods! **SOLD**
95 EGT New beater! And gawd damnit shes NOT pink!
Comment
-
Originally posted by Tazman2 View PostWell. After seeing the hole in Jon's beater where the holder USED to be i'm a bit paranoid that "cancer" will set in eventually if i don't fix it soon!sigpic
03 Accord DX: K24/5MT, peasant-spec old man's car
92 240SX: KA/T25, nerd mobile
Comment
-
Originally posted by atomicEGT View Postyeah, it will. my beater had a giant hole there, and my 95 has a small one. i'm planning on just welding a plate over the spot and cutting off the jack well.**SOLD** 93 EGT with more suspension mods then your average riced out civic's # of decals + useless "bling/style/culture" mods! **SOLD**
95 EGT New beater! And gawd damnit shes NOT pink!
Comment
-
Originally posted by atomicEGT View Postmine's coming from the vents in the quarter that are covered by the bumper.
either way, should take only an hour to seal everything
I get the same thing... It sucks! why the heck is there a vent there?
Comment
-
Originally posted by Random_ES View PostI get the same thing... It sucks! why the heck is there a vent there?
mine has that leak (323) its the quater glass, and the hinges for my hatch. Im just gonna de-reust, etch primer and truck bed coat the tire well and then seal it all"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
Comment