Did any of you guys ever looked at implementing sequential injection for fuel efficiency at low rpm? I looked over the diagrams and if you connect a switching circuit that will switch after every time the injector output is triggered, then, sequential injection can be easily achived. Basically, every bank of 2 injectorw will be split in half so only 1 injector fires at a time.
Could always use the processor itself but then the PCB needs to be changed, I'd rather use an external switching circuit though, still need to think about what to use for a switching circuit.
Could always use the processor itself but then the PCB needs to be changed, I'd rather use an external switching circuit though, still need to think about what to use for a switching circuit.
Comment