what does everyone think of putting the GTR repilic front bumper on an 88 GTX? in thinking of getting it from corksport because i want room for a big FMIC but i kinda feel that it might not look as good as it does on a real GTR. if i do it should i do the GTR hood vents also?
Announcement
Collapse
No announcement yet.
GTR front end
Collapse
X
-
GTR front end
"See that car, in the 80's that car was deadly." Random man to his son while passing the GTX in a parking lot
Originally posted by neuspeedescortthe proper spelling would be "Launchabilitiness" i do believe.
-88' Mazda 323 GTX, caged and ready for dirt
-93' Mazda Miata, half caged
-09' Mercedes C63 AMG
-87' Toyota Land Cruiser, 33's with slight lift, safari style!Tags: None
-
will it even work on the BF?I live my life a quarter pounder at a time. And for those 500 calories or more, I'm free. I need FRIES! Two of them. The big ones. Oh, and I need them tonight. You're lucky the double shot of BBQ sauce didn't blow the seam on your nugget box. There she is, 2 pounds of pure beef. My dad ate it in 9.0 seconds flat. Check it out, it's like this. If I lose, winner takes my happy meal. But if I win, I take the burger and the toy. To some people, that's more important.
._________________________
|.....Overnight....................| ||
|.....Japan Parts.................| |'|";,___.
|_..._...____________======||_|_|...,]
"(@)'(@)""'''''''''''''"'''"**|(@)(@)*****"(@)
Oh and by the way that shot in your banner with Vin Diesel's car getting shot, thats a civic not an altezza.
-
Yeah cs makes a replica that is sized for the bf due to the lack of aftermarket bumpers for the bf. I personally don't like the gtr bumper on the gtr. But the hood vents look good on a bf.
1988 White GTX - #1 parts
1988 Black GTX - #2 reliably broken touge monstar (294,000 miles no rebuilds) - dead
1988 Blue GTX - #3 in progress (view here)
1988 Blue GTX - #4 BPT swapped weekend warrior.
1988 White GTX - #5 Rally car
Comment
-
Yeah it is very functional.
1988 White GTX - #1 parts
1988 Black GTX - #2 reliably broken touge monstar (294,000 miles no rebuilds) - dead
1988 Blue GTX - #3 in progress (view here)
1988 Blue GTX - #4 BPT swapped weekend warrior.
1988 White GTX - #5 Rally car
Comment
-
Originally posted by 808 View PostI personally don't like the gtr bumper on the gtr.1990 Protege 4WD
GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents
1 3 5
├┼┤
2 4 R
Seeking: Canadian 4WD seatbelts.
Comment
-
i was looking at it too but i cant afford 600 for a bumper!!!! but i need to find a fender, hood, and bumpers now due to crashing my GTX yesterday. oh yea and a rear bumper for a 2000 durango.......got pushed right into it and the person that did it rolled out before i could even think about getting the tag number
'95 Ford Escort LX, GTX block .40 over, wiseco 9.1 pistons, gtr rods, gtx head, MS1, 550 inj. T3/T4 .57 Trim, DSM BOV, WALBRO 255 FP, civic half rad, MSP LSD, stage 3 kyclutch, ebay short shifter, mx-3 rear tie bar, AEM wideband....SHE IS ALIVE
'88 Mazda Gtx AWD B6T engine Ported head, VJ-11, EL prototype chipped ECU, Blitz SBC-iD electronic boost controller, Full HKS exhaust, Centerforce dual friction clutch & more
Comment
-
there is a guy on FEOA who has one of those sidemounts but he is running it as a front mount....
offer to trade him for an actual frontmount? lolEscort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
Comment
-
yea he lives near me i asked him why did he buy that thing when you can get one like i have on my gt for 1/2 the price (FMC 28x10x2.5)
'95 Ford Escort LX, GTX block .40 over, wiseco 9.1 pistons, gtr rods, gtx head, MS1, 550 inj. T3/T4 .57 Trim, DSM BOV, WALBRO 255 FP, civic half rad, MSP LSD, stage 3 kyclutch, ebay short shifter, mx-3 rear tie bar, AEM wideband....SHE IS ALIVE
'88 Mazda Gtx AWD B6T engine Ported head, VJ-11, EL prototype chipped ECU, Blitz SBC-iD electronic boost controller, Full HKS exhaust, Centerforce dual friction clutch & more
Comment
-
Look closely at the car on the left and you'll see it's a BF chassis:
If I'm mistaken, than someone did a hell of a job mounting BF headlights/corners on a BG chassis. It's hard to tell really since the side mirrors still look like a 323/Pro.
So yeah I think the GTR front end goes nicely on a BF.Not the sports page Not a magazine
Comment
-
thanks hadoken, u just made up my mind. it looks great on the BF"See that car, in the 80's that car was deadly." Random man to his son while passing the GTX in a parking lot
Originally posted by neuspeedescortthe proper spelling would be "Launchabilitiness" i do believe.
-88' Mazda 323 GTX, caged and ready for dirt
-93' Mazda Miata, half caged
-09' Mercedes C63 AMG
-87' Toyota Land Cruiser, 33's with slight lift, safari style!
Comment
-
I don't like the side profile of them... the front looks fine.
1988 White GTX - #1 parts
1988 Black GTX - #2 reliably broken touge monstar (294,000 miles no rebuilds) - dead
1988 Blue GTX - #3 in progress (view here)
1988 Blue GTX - #4 BPT swapped weekend warrior.
1988 White GTX - #5 Rally car
Comment
-
I wish the set of side skirts that i got worked because I haven't seen a BF with the GTR replica bumper on it with the factory/jdm/etc side skirts. It might look better with those. Just a thought.1988 323 GTX 5 speed
MODS: It's my garage art
1990 Miata 5 speed
MODS: Awaiting on GM goodness...
1990 Protege 4wd 5 speed
MODS: BPT/AWD swap, JSPEED Coilovers, MS3PRO
2000 Miata 5 speed
Stock with Bilstein Suspension Package
Chillin in the backyard with a rod knock
Comment
Comment