rims

[cmartin7x]

i have a chance to get some 4 on 100 rims. they were off of a honda. anyone know if they will fit or not?

[therieldeal]

yes they will but the center hub diameter on the honda is bigger, so they wont be hubcentric

[cmartin7x]

will that cause any problems? ill be using them on the race car

[therieldeal]

for a circle track car i'd want to run hubcentric wheels... just in case. you may be able to get hubcentric adapter rings for them.

i run aftermarket wheels without adapter rings for my drag tires... but i dont do any high speed turning or wall/car bumping either

[cmartin7x]

will zx2 rims fit on my egt? and will it be hub centric?

[Turpro]

will zx2 rims fit on my egt? and will it be hub centric?

Yes they will fit but and they should be the same hub size. Not 100% on the hub size though.

[therieldeal]

yes they will fit perfectly. if you want some options:

any 4x100 miata
any mx3
any 4x100 protege
any 91+ escort of any trim

will all fit perfectly

[jrally]

Toyotas with 4-100 hubs have the same size hub center as well. I'm 99% sure the new Cooper Minis are the same too, since we've bolt on several sets onto my friends Corollas.

-Jon R.

[Hadoken]

yes they will fit perfectly. if you want some options:

any 4x100 miata
any mx3
any 4x100 protege
any 91+ escort of any trim

will all fit perfectly

91-92 Escort Pony/LX have the smaller 9" brakes and 13" rims. I thought they didn't clear the larger calipers which is why they jumped up to 14" rims along with the larger rotors?

[rustfreeinpa]

right the 13 in will not fit over your egt calipers

[therieldeal]

that is true, but i was talking in terms of wheels that fit on the car... those will fit properly/be hubcentric.

[rustfreeinpa]

yeah i guess it dont mater, its a race car, just has to go fast ,turn left.. dont need the calibers any way..lmfao

[Sockington]

i run aftermarket wheels without adapter rings for my drag tires... but i dont do any high speed turning or wall/car bumping either

I ran aftermarket rims on my Toyota MR2 last year without hub centric rings (they were off a Civic, so they had the larger bore) and didn't run into any problems.

Now, mind you, hand centering the wheels whenever they needed to be removed/installed a bit of a pain in the ass, but it worked out fine.

I put them on as a test, before I bought centering rings, but since I didn't encounter any trouble (even on my 3 day racing trip to Kingston with a lapping day and two autocrosses in a weekend followed by the 8 hour drive home).

I should buy some rings sometime, but I guess I just got lazy.

[tireboy]

with using honda rims .. make sure you use the wheel nuts they came with . honda wheels use ball seat nuts... other wise you may lose a wheel ...