Sooo, We put the 86LX/B6T back together and now are getting no injector pulse at the injector clips. There IS lots of feul pressure though. So, needless to say, the car wont start. We've got spark and with a little ether the car ran for a few seconds normally, so i can rule out any sort of timing issue as a possible cause for the no start.
So, what else could we have forgotten that is causing no injector pulse? This car did run, and was removed for cyl head machining. Its got a b6t + full engine harness and ecu. As far as I can see, everything is connected up.
Any ideas? Something i may have missed that would cause no injector pulse?
thanks!
brandon
So, what else could we have forgotten that is causing no injector pulse? This car did run, and was removed for cyl head machining. Its got a b6t + full engine harness and ecu. As far as I can see, everything is connected up.
Any ideas? Something i may have missed that would cause no injector pulse?
thanks!
brandon
Comment