Announcement

Collapse
No announcement yet.

well i guess im a member now

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    well i guess im a member now

    so i finally got around to putting in my rx7 460's and well finally no boost lag creep or overboost!!!! on a bp26 ecu....so all was well and i finally beat ryan bpt323 and well then i kept up to a mustang cobra and then week later car decieded to on my way to get some damm good brats at Bratfest she went from normal temp to HOLY HELL HOTTT! turns out head gasket decied to say **** you!
    Attached Files
    Last edited by madtownmazda; 05-29-2008, 08:34 AM.
    My baby 93' Protege Lx--R.I.P
    New Baby 94' Protege Lx Black
    91' Miata - SOLD
    93' Protege LX new Project (no rust)!
    Mods: Protege:
    Engine: Fully built with wiseco 9:1 +1mm ceramic coated tops and molly skirts, M-tuned H beams, ACL Race rod and thrust bearings with King Mains, Arp Mains ,rod and head studs,3 lbs lightend crank, Everything is ballanced, spec stage 3 clutch,lightend flywheel, RX7 Afm, Fidanza Adj. cam gears, timing,Cut intake manifold from BPT323, exintake cam swap,full port and polished head 1mm stainless oversize valves, vf12/vj20Turbo, 3" custom full exhaust w/external wastegate,3" E-Cut, Eclipse crushed BOV , Fmic, Aem Urgo wideband, Autometer boost gauge, Magnaflo Muffler,batt relocated to trunk, slight wire tuck with engine bay fuse box under dash Bp26 ecu
    Suspension: Energy Suspension rear trailing arms,Es Front Sway bar endlinks,Zx2 Front Sway Bar,El Sport w/bilstein mono tube struts and don't know what springs, Suspension Tequniques Rear Sway bar with Es endlinks,mx3 rear lower tie bar. corksport SS brakelines and clutch line.
    Exterior: Adler Racing 16"s ,Mx6 Front lip,EGT Glass Sunroof,Edm Headlight & corners EGT side skirts,Gt Led wing, Led interior 3rd brake light
    Audio: few things polk momo 6.5 components, VW Monsoon Front Componants with monsoon amp,alpine head unit
    sigpic

    #2
    rub it in slut... its a shame you blew your ****. im ready to give it another run
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it

    Comment


      #3
      At least now you can build it better now
      1993 Protege LX-Midnight's shadow SOLD
      1996 Honda CBR600-Wrecked. Damn Honda crippled me
      2002 mazda MPV-family truckster SOLD
      2010 VW routon

      Originally posted by jay
      .....they totally underestimated the number of gearheads such as myself that have families but refuse to grow the hell up and stop playing with cars, or that otherwise see the utility of having 4 doors. Obviously I ain't alone, as there are a helluva lotta sti and evo here. Bueler? Beuler? Mazda? Mazda?

      Comment


        #4
        that reminds me i have to get my downpipe redone with stainless flex and flange

        Comment


          #5
          Originally posted by bpt323 View Post
          rub it in slut... its a shame you blew your ****. im ready to give it another run
          Haha i will rub it in and im a retired slutt thank you very much. lets get those pistons
          My baby 93' Protege Lx--R.I.P
          New Baby 94' Protege Lx Black
          91' Miata - SOLD
          93' Protege LX new Project (no rust)!
          Mods: Protege:
          Engine: Fully built with wiseco 9:1 +1mm ceramic coated tops and molly skirts, M-tuned H beams, ACL Race rod and thrust bearings with King Mains, Arp Mains ,rod and head studs,3 lbs lightend crank, Everything is ballanced, spec stage 3 clutch,lightend flywheel, RX7 Afm, Fidanza Adj. cam gears, timing,Cut intake manifold from BPT323, exintake cam swap,full port and polished head 1mm stainless oversize valves, vf12/vj20Turbo, 3" custom full exhaust w/external wastegate,3" E-Cut, Eclipse crushed BOV , Fmic, Aem Urgo wideband, Autometer boost gauge, Magnaflo Muffler,batt relocated to trunk, slight wire tuck with engine bay fuse box under dash Bp26 ecu
          Suspension: Energy Suspension rear trailing arms,Es Front Sway bar endlinks,Zx2 Front Sway Bar,El Sport w/bilstein mono tube struts and don't know what springs, Suspension Tequniques Rear Sway bar with Es endlinks,mx3 rear lower tie bar. corksport SS brakelines and clutch line.
          Exterior: Adler Racing 16"s ,Mx6 Front lip,EGT Glass Sunroof,Edm Headlight & corners EGT side skirts,Gt Led wing, Led interior 3rd brake light
          Audio: few things polk momo 6.5 components, VW Monsoon Front Componants with monsoon amp,alpine head unit
          sigpic

          Comment


            #6
            Hay that's my DP! Welcome to the club

            I hope your build goes faster than mine.

            94 Protege LX: HX-35, Megasquit, ect...
            98 Subaru Legacy GT-DD: 1 inch lift, and all the standard N/A stuff.

            Comment


              #7
              Dang sad to see that happen! I remember when I saw this beast at the meet it was a nice car! Your going to rebuild her right?
              1991 Mazda 323 Base (Gretchen)-Build Thread
              Sold-1987 Mazda 323 Wagon (Molly)-Build Thread
              R.I.P.-1988 Mazda 323 GT (Misty) -Build Thread

              Oh Colorado, how beautiful your mountains and awesome your roads!

              Comment


                #8
                Well the bottom end looks good - just a headgasket.

                Comment


                  #9
                  Do a rebuild if needed, otheriwise resurface the head slap another gasket on it and call it a day.
                  1990 Protege 4wd: BP05 forged internals, Mild ported head, GTR intake manifold, Gates racing timing belt, GTX transmission, Stage 3 clutch, 60trim T-3 turbo, Custom down pipe,3" Stainles exhaust, , Walbro fuel pump, RB-Performance fmic kit, HKS bov, Aurfa coilovers, F&R drilled slotted rotors, 16" BBS wrapped with Advan Novea tires, EDM glass headlights with HID's, Familia front and rear bumpers.


                  Boosted 1990 4WD
                  http://www.wihandyman.com/forum/showthread.php?t=32462


                  sigpic

                  Comment


                    #10
                    were ordering oversized SS valves from corksport & using ARP headstuds with my head i worked in this thread:

                    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                    1992- project FE3..... 313 WHP @ 9.3psi




                    I pet my dash when I get into the car..."good car"
                    he actually has a mazda tree, parts grow on it

                    Comment


                      #11
                      Is that one of your cut intake manifolds?
                      1990 Protege 4wd: BP05 forged internals, Mild ported head, GTR intake manifold, Gates racing timing belt, GTX transmission, Stage 3 clutch, 60trim T-3 turbo, Custom down pipe,3" Stainles exhaust, , Walbro fuel pump, RB-Performance fmic kit, HKS bov, Aurfa coilovers, F&R drilled slotted rotors, 16" BBS wrapped with Advan Novea tires, EDM glass headlights with HID's, Familia front and rear bumpers.


                      Boosted 1990 4WD
                      http://www.wihandyman.com/forum/showthread.php?t=32462


                      sigpic

                      Comment


                        #12
                        yes it is and **** its all green and nasty!! lol dam gasket
                        My baby 93' Protege Lx--R.I.P
                        New Baby 94' Protege Lx Black
                        91' Miata - SOLD
                        93' Protege LX new Project (no rust)!
                        Mods: Protege:
                        Engine: Fully built with wiseco 9:1 +1mm ceramic coated tops and molly skirts, M-tuned H beams, ACL Race rod and thrust bearings with King Mains, Arp Mains ,rod and head studs,3 lbs lightend crank, Everything is ballanced, spec stage 3 clutch,lightend flywheel, RX7 Afm, Fidanza Adj. cam gears, timing,Cut intake manifold from BPT323, exintake cam swap,full port and polished head 1mm stainless oversize valves, vf12/vj20Turbo, 3" custom full exhaust w/external wastegate,3" E-Cut, Eclipse crushed BOV , Fmic, Aem Urgo wideband, Autometer boost gauge, Magnaflo Muffler,batt relocated to trunk, slight wire tuck with engine bay fuse box under dash Bp26 ecu
                        Suspension: Energy Suspension rear trailing arms,Es Front Sway bar endlinks,Zx2 Front Sway Bar,El Sport w/bilstein mono tube struts and don't know what springs, Suspension Tequniques Rear Sway bar with Es endlinks,mx3 rear lower tie bar. corksport SS brakelines and clutch line.
                        Exterior: Adler Racing 16"s ,Mx6 Front lip,EGT Glass Sunroof,Edm Headlight & corners EGT side skirts,Gt Led wing, Led interior 3rd brake light
                        Audio: few things polk momo 6.5 components, VW Monsoon Front Componants with monsoon amp,alpine head unit
                        sigpic

                        Comment


                          #13
                          Originally posted by Crazypunkerguy View Post
                          Dang sad to see that happen! I remember when I saw this beast at the meet it was a nice car! Your going to rebuild her right?

                          yes i am but i don't have the money to do tha bottom end just now i will soon tho but i wanna be able to make it to the national meet so im just gonna do the head work now and then all the other later
                          My baby 93' Protege Lx--R.I.P
                          New Baby 94' Protege Lx Black
                          91' Miata - SOLD
                          93' Protege LX new Project (no rust)!
                          Mods: Protege:
                          Engine: Fully built with wiseco 9:1 +1mm ceramic coated tops and molly skirts, M-tuned H beams, ACL Race rod and thrust bearings with King Mains, Arp Mains ,rod and head studs,3 lbs lightend crank, Everything is ballanced, spec stage 3 clutch,lightend flywheel, RX7 Afm, Fidanza Adj. cam gears, timing,Cut intake manifold from BPT323, exintake cam swap,full port and polished head 1mm stainless oversize valves, vf12/vj20Turbo, 3" custom full exhaust w/external wastegate,3" E-Cut, Eclipse crushed BOV , Fmic, Aem Urgo wideband, Autometer boost gauge, Magnaflo Muffler,batt relocated to trunk, slight wire tuck with engine bay fuse box under dash Bp26 ecu
                          Suspension: Energy Suspension rear trailing arms,Es Front Sway bar endlinks,Zx2 Front Sway Bar,El Sport w/bilstein mono tube struts and don't know what springs, Suspension Tequniques Rear Sway bar with Es endlinks,mx3 rear lower tie bar. corksport SS brakelines and clutch line.
                          Exterior: Adler Racing 16"s ,Mx6 Front lip,EGT Glass Sunroof,Edm Headlight & corners EGT side skirts,Gt Led wing, Led interior 3rd brake light
                          Audio: few things polk momo 6.5 components, VW Monsoon Front Componants with monsoon amp,alpine head unit
                          sigpic

                          Comment


                            #14
                            Originally posted by photoeye0 View Post
                            Hay that's my DP! Welcome to the club

                            I hope your build goes faster than mine.
                            im not fully building cuz the mooolah is short bills come first now after this for a lil while my pistons and rings seem fine never noticed oil burnin but deff noticed some seals on the engine need replacing lol but shoud be done with the head in about a week or so then shes back alive!! yey
                            My baby 93' Protege Lx--R.I.P
                            New Baby 94' Protege Lx Black
                            91' Miata - SOLD
                            93' Protege LX new Project (no rust)!
                            Mods: Protege:
                            Engine: Fully built with wiseco 9:1 +1mm ceramic coated tops and molly skirts, M-tuned H beams, ACL Race rod and thrust bearings with King Mains, Arp Mains ,rod and head studs,3 lbs lightend crank, Everything is ballanced, spec stage 3 clutch,lightend flywheel, RX7 Afm, Fidanza Adj. cam gears, timing,Cut intake manifold from BPT323, exintake cam swap,full port and polished head 1mm stainless oversize valves, vf12/vj20Turbo, 3" custom full exhaust w/external wastegate,3" E-Cut, Eclipse crushed BOV , Fmic, Aem Urgo wideband, Autometer boost gauge, Magnaflo Muffler,batt relocated to trunk, slight wire tuck with engine bay fuse box under dash Bp26 ecu
                            Suspension: Energy Suspension rear trailing arms,Es Front Sway bar endlinks,Zx2 Front Sway Bar,El Sport w/bilstein mono tube struts and don't know what springs, Suspension Tequniques Rear Sway bar with Es endlinks,mx3 rear lower tie bar. corksport SS brakelines and clutch line.
                            Exterior: Adler Racing 16"s ,Mx6 Front lip,EGT Glass Sunroof,Edm Headlight & corners EGT side skirts,Gt Led wing, Led interior 3rd brake light
                            Audio: few things polk momo 6.5 components, VW Monsoon Front Componants with monsoon amp,alpine head unit
                            sigpic

                            Comment


                              #15
                              Originally posted by TurboProto View Post
                              Do a rebuild if needed, otheriwise resurface the head slap another gasket on it and call it a day.
                              yess but i figure why not go bigger since its all apart! lol
                              My baby 93' Protege Lx--R.I.P
                              New Baby 94' Protege Lx Black
                              91' Miata - SOLD
                              93' Protege LX new Project (no rust)!
                              Mods: Protege:
                              Engine: Fully built with wiseco 9:1 +1mm ceramic coated tops and molly skirts, M-tuned H beams, ACL Race rod and thrust bearings with King Mains, Arp Mains ,rod and head studs,3 lbs lightend crank, Everything is ballanced, spec stage 3 clutch,lightend flywheel, RX7 Afm, Fidanza Adj. cam gears, timing,Cut intake manifold from BPT323, exintake cam swap,full port and polished head 1mm stainless oversize valves, vf12/vj20Turbo, 3" custom full exhaust w/external wastegate,3" E-Cut, Eclipse crushed BOV , Fmic, Aem Urgo wideband, Autometer boost gauge, Magnaflo Muffler,batt relocated to trunk, slight wire tuck with engine bay fuse box under dash Bp26 ecu
                              Suspension: Energy Suspension rear trailing arms,Es Front Sway bar endlinks,Zx2 Front Sway Bar,El Sport w/bilstein mono tube struts and don't know what springs, Suspension Tequniques Rear Sway bar with Es endlinks,mx3 rear lower tie bar. corksport SS brakelines and clutch line.
                              Exterior: Adler Racing 16"s ,Mx6 Front lip,EGT Glass Sunroof,Edm Headlight & corners EGT side skirts,Gt Led wing, Led interior 3rd brake light
                              Audio: few things polk momo 6.5 components, VW Monsoon Front Componants with monsoon amp,alpine head unit
                              sigpic

                              Comment

                              Working...
                              X