I have a 99 Protege LX with a factory CD player, and over the course of the past few months, it has slowly refused to play my burnt CDs. When I put the CD in it will make the usual scanning noises, and after 10-30 seconds of this it will either start playing or will give up and spit the CD out. Also, once it is playing, it is impossible to scan through tracks as the CD player scans through an entire song in about half a second. If anyone know what the problem is, I would appreciate it if you could help me out.
Announcement
Collapse
No announcement yet.
Trouble reading CD-R's
Collapse
X
-
have you tried cleaning the hu??? it might be that, i believe you can buy a cleaning kit for cd players, and maybe save yourself 200 bucks......HELLO MY NAME IS BEN...
186.08whp
225.94wtq
torque monster!!!!
dyno graph 8-10-and 12psi
http://www.msprotege.com/members/THE...no%20graph.jpg
http://videos.streetfire.net/player....0-C19CA06AF01E dyno vid
blahblahblahblahblahblah
Comment
-
Originally posted by ProtonPants
I want something pretty close to stock spec. The ability to play MP3s would be nice though. I'm not sure about the pricing for a decent one, but I think $200 would be a reasonable limit.
this JVC headunit.
for $140 shipped.
i've got the highest JVC unit and love it. the lower ones incorporate some of the same features that mine has it's a great unit, and a killer price. it's about $200 on other sites, and it's on sale right now on thezeb
Comment
-
Looks good! Thanks. I was looking around at the electronics stores in my area, and I decided that I'll do the whole system. I'm thinking about putting in 4 of these Infinities that I liked and a HU. And maybe a sub/amp combo while I'm at it...hehe.Personal 1/4 mile: 57 sec @ 14 mph
Haven't tried with the pro yet...
Comment
-
Originally posted by ProtonPants
Looks good! Thanks. I was looking around at the electronics stores in my area, and I decided that I'll do the whole system. I'm thinking about putting in 4 of these Infinities that I liked and a HU. And maybe a sub/amp combo while I'm at it...hehe.
upgrading your HU and speakers will make a HUGE difference if you are thinking about getting an amp and sub, i would highly recomend getting a 4 channel amp, and run the front channels to a set of front components, and bridge the rears to a sub. or get something like this.
don't bother amping the rear speakers. how much total are you looking on spending? there are plenty of people on here along with myself that can recomend the best for your budget
Comment
-
Once I start looking at amps everything gets confusing... My original idea would have cost about $400 w/o installation, which I plan to do myself. If I wanted an amp and sub, I would need to add another $250. If you have any ideas that would keep me in the $600 range, I would like to hear them. Thanks for all the help!Personal 1/4 mile: 57 sec @ 14 mph
Haven't tried with the pro yet...
Comment
-
With. Basically, I want to have good sound quality, not window-rattling bass. I would like to spend around $600 for the whole system, but if you feel that to attain higher quiality sound I should spend more, than that's ok too. What I don't want is four 2000W subs in my trunk and hot seats.Personal 1/4 mile: 57 sec @ 14 mph
Haven't tried with the pro yet...
Comment
-
HU: JVC for $140
front speakers: alpine typeR 5.25" components
$150 from the same site i bought mine.
i'll be making some adapter plates to put the mid-bass and tweeters in the stock 6x8 locations without a fiberglass pod on the back i'll sell you a set for $10 plus shipping. with a fiberglass pod will be more like $40, depending on how long they take to make. the fiberglass pod will increase the mid-bass performance and protect the speakers from water
rear speakers: alpine typeS 6x9's
$80 for some nice 6x9's that will compliment the front components.
they'll mount fine in the stock location, and don't need to be amped.
sub: 12" elemental designs K-series
$135 for one badass 12.
you can put it in a prefab sealed box for nice bass, without all the rattles you should be able to pick up a sealed box from a local shop for under $50.
amp: xtant reconditioned 3-channel amp
under $200 off e-bay.
the new model of that amp retails at $1200
wiring: knukonceptz 4 channel kit
$36 for nice wires.
all that's right around $800, but it'll be a sick setup
Comment
Comment