I have a bf 323 gt that had the hks stage 3 setup this included the hks evc, hks pfc-fcon, hks j pipe & 2.5" exhaust. Since then i had done the bpt swap with bpt wiring the only thing that i am not using from the previous setup is the hks pfc-fcon as the connector are different what i want to know is if it can work on the bpt & if so what is need to make it work properly. I have seen a post about chaning the chip in the fcon but i do not recall what model chip & where i can get that chip from. The reason y i am interested in using back the fcon is because i do not hav the money as yet to buy the haltec e6x as yet so i am working with what i hav at the moment.