Announcement

Collapse
No announcement yet.

FE3 Adjustable Camgears-fidanza

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FE3 Adjustable Camgears-fidanza

    FINAL UPDATE~~~ Here's the correct part #'s: to order through fidanza or affiliates:

    940204 (silver)
    940206 (red)
    940209 (blue)



    USA members pay $90.14 total/each with paypal fees
    AUSTRAILA members pay $91.02 USD total/each with paypal fees
    NEW ZEALAND members pay $91.02 USD total/each with paypal fees


    If your from a different country then above please use the calculator below to calculate your price with fee's
    PAYPAL FEE CALCULATOR

    My paypal account addy is as follows: bpt323@gmail.com

    Please include in the paypal comment [who you are]- [how many sets your paying for] & [whether its a 50% or in full payment]. Please do not send payment without the listed info or it will be refunded

    I've personally contacted fidanza in reference to having adjustable cam gears made. since i can't find an actual manufacturer of aftermarket design. Below is a semi mimic of the progress involved in seeing this through minus individual posts from members(sorry guys)

    anyhow here are the emails back from fidanza:

    Hey Ryan,
    Thanks for contacting Fidanza. In order to make a new cam gear design, we would need to be supplied with an OE sample. The minimum order quantity for a run of cam gears is 50 units. An estimated cost for this amount of units would be anywhere from $80-$120 USD per unit. If this is something that you would be interested in doing, let us know and we will let you know what the next step in the process would be.
    Thank You,

    Brad Bojc

    Fidanza Engineering Corp.
    4285 Main Street
    Perry, Ohio 44095

    brad@fidanza.com
    Fidanza Flywheel & Performance Parts

    Phone: (440) 259-5656 x111
    Fax: (440) 259-5588


    I would seriously like to pursue this matter & have fidanza produce a product of good quality & make it readily available to all FE3 folks.

    based upon the email back, One would assume we need a minimum of 25 people (2 gears/motor/person). I know i am serious enough to start a list. With enough influence here we can meet the goal


    Anyone- who needs to contact me to varify such things please feel free. I have a serious track record proceeding who i am as a person. you may contact me in person: via PM on here, my email b p t 3 2 3 @ g m a i l . c o m or PM me for my cell phone if you do not have it.

    I've sent a return email to brad informing him that i will be currently working to start gathering interested parties.

    Regards,
    Ryan



    COLOR TOTALS: =9 | =6 | SILVER=9 | 18.5 sets undecided unless members step forth i will personally break the 18.5 down between the 3 colors majority will be silver
    Color table: Paid 50% or in full | unpaid or no response yet | PM sent awaiting response | Pending
    Interested Parties: (25 people goal)
    1. Bpt323- 1 set paid in full***(silver)
    2. lundgren420- 1 cam gear paid in full*** (red)
    3. Roth251- 1 set paid in full***(blue)
    4. STW- 2 sets paid in full***(silver/red)
    5. Chief Tool- 2 sets paid in full*** (silver)
    6. Bakmans- 1 set paid in full***(silver)
    7. Sleeper1- 1 set paid in full***(blue)
    8. CaseJunkie- 2 sets paid in full ***(blue/red)
    9. Compnut- 1 set paid in full***(red)
    10. Mazdaturbo.dk- 1 set paid in full***(BLUE)
    11. shwine617- 1 set paid in full*** (red)
    12. N.T.B.A.- 1 set paid in full***(blue)
    13. RodHog- 1 set paid in full***(silver)
    14. M2cupcar- 1 set paid in full***(silver)
    15. ractive- 1 set paid in full***(silver)
    16. Fred- 1 set paid in full***(blue)
    17. monoxidechild- 1 set paid in full***(silver)
    18. matt89glturbo 2 sets paid in full***(red/silver)
    19. Stroker- 2 sets paid in full***(silver,red)
    20. Jesiotrot- 2 sets paid in full***(blue/red)
    21. zoOm- 1 set paid in full***(silver)
    22. Martinsen- 1 set paid in full***(blue)
    23. DEFBOY35- 1 set paid in full***(silver)
    24. boosted_rafi- 1 set paid in full***(silver)
    25. Infini- 1 set paid in full***(silver)
    26. LMB__- 1 set paid in full***(red)
    27. Cam22t- 2 sets paid in full***(silver)
      ------------------------------------------------------------
    28. Dino- 1 set 50% paid**(blue)

      -------------------------------------------------------------




      additional members into the remaining 11 sets:
      Fred-(blue)
      Rodhog-(Silver)
      M2cupcar(silver)
      Ractive(silver)
      cheif tool(silver)
      matt89glturbo(red/silver)
      DEFBOY35(silver)
      boosted_rafi(silver)
      Infini(silver)




    ------------------------------------------------------
    Members who have not contacted me in anyway or made payment
    1. Lundberg- 1 set
    2. Gaus90- 1 set
    3. Crispin Ferreir- 1 set
    4. B3ndr- 2 sets
    5. Racingdude- 2 sets
    6. BoostedBSeries- 1 set
    7. Piggyback- 1 set
    8. Mazdafreaks- 1 set
    9. Robbierat- 1 set pending
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it


    #2
    Sign me up Ryan, one set for me, and one set for Ben.

    Comment


      #3
      blazing fast reply on brads part here:
      Hey Ryan,

      Since both gears are identical, then 50 gears would make 25 sets. 50 is the minimum quantity that we can make for any cam gear.

      Here's the address:
      Fidanza Engineering Corp.
      4285 Main St.
      Perry, OH 44081

      You can send it to my attention.

      Thank You,

      Brad Bojc

      Fidanza Engineering Corp.
      4285 Main Street
      Perry, Ohio 44095

      brad@fidanza.com
      Fidanza Flywheel & Performance Parts

      Phone: (440) 259-5656 x111
      Fax: (440) 259-5588
      ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

      1992- project FE3..... 313 WHP @ 9.3psi




      I pet my dash when I get into the car..."good car"
      he actually has a mazda tree, parts grow on it

      Comment


        #4
        estimated cost range was $80-120. however fidanza will confirm in that price range once they recieve my OEM gear & have a chance to CAD design it.
        For now thats what we have to work with. "$80-$120/gear"
        ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

        1992- project FE3..... 313 WHP @ 9.3psi




        I pet my dash when I get into the car..."good car"
        he actually has a mazda tree, parts grow on it

        Comment


          #5
          12-19-07

          cam gear is boxed & ready to ship out tommorow. I've included a letter to brad..........


          Brad,


          Here is the O.E.M. camshaft gear as discussed via emails (b p t 3 2 3 @ g m a i l. c o m)
          Please use it as you see fit. This gear is applicable to Mazda 626/capella “Fe3” 2.0L engines & Kia Sportage 95-2002’ 2.0L motors

          I have taken the time to gather some basic information. Whether it will aid you or be purely for entertainment on my end. Please let me know how far off I truly was.
          Face measurements as also written in their perspective places (pencil) more visible under light @ a given angle.

          Estimates are as follows: (may or may-not be accurate- measurements by digital caliper)

          Diameter ~ 4.958”
          Width ~1.135”
          50 teeth
          360°/50= ~7.2°/tooth

          Front face measurements (depth):
          Max: ~ .364” -Outer drop
          Min: ~ .332” -Center rise

          Rear face measurements (depth):
          Max: ~ .619” -Center drop
          Mid ~ .566 -Outer drop
          Min ~ .365” –Center rise


          Best regards,

          Ryan Sahs
          ClubProtege.com
          ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

          1992- project FE3..... 313 WHP @ 9.3psi




          I pet my dash when I get into the car..."good car"
          he actually has a mazda tree, parts grow on it

          Comment


            #6
            The Latest....


            Ryan, I currently am designing the cam that you supplies the OE and clearance photos for. My concern at this point is how thin the center of this cam gear is. Measured at .160, it throws up concerns when I design this out (strength-wise). I can add certain radius corners and maybe increase the overall center thickness and resolve the problem. For me to do this, is there a way that you could supply us with the actual cam shaft and/or center bolt and washer? This would greatly speed up the design process. Let me know if this would be possible at this time.


            Thank you for your time.


            Chris Barbian
            Fidanza Engineering
            Senior Design Engineer
            eng@fidanza.com


            ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

            1992- project FE3..... 313 WHP @ 9.3psi




            I pet my dash when I get into the car..."good car"
            he actually has a mazda tree, parts grow on it

            Comment


              #7
              1-10-08

              I mailed the cam & bolt out to fidanza yesterday so it should arrive next week monday @ the latest.
              ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

              1992- project FE3..... 313 WHP @ 9.3psi




              I pet my dash when I get into the car..."good car"
              he actually has a mazda tree, parts grow on it

              Comment


                #8
                recent update. i have to find some time to swing back home & remeasure the following requested. (I feel as if i should of just mailed the entire head to them) never the less....


                Ryan,
                The current design is going to need some additional dimensions from your end to verify clearances that might be a problem. As attached below, you can see A, B & C dims needed. This is common and I do not have any access to that motor at this time to verify these needed dims.

                A - the outer most diameter of the two combined bolts that protrude.
                B - the height of the protruding bolts from the face.
                C - the total height of the shaft from the face. Therefore I can adjust all my measurements pertaining to where the cam will sit on the shaft.

                Thanks
                Chris
                ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                1992- project FE3..... 313 WHP @ 9.3psi




                I pet my dash when I get into the car..."good car"
                he actually has a mazda tree, parts grow on it

                Comment


                  #9
                  Clearance dimensions!!!

                  clearance dimensions & pictures
                  ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                  1992- project FE3..... 313 WHP @ 9.3psi




                  I pet my dash when I get into the car..."good car"
                  he actually has a mazda tree, parts grow on it

                  Comment


                    #10
                    Essentially heres the breakdown. if we want to push this group buy through we need to assess our bank accounts now!!!
                    I've returned an email to brad inquiring what methods for payment are available & accepted. as well as if individual payments can be made directly to fidanza. in an attempt to rule out a middle man.

                    Have the money on hand, but do not attempt to send it anywhere for payment until we've heard back from Brad in regards.

                    Ryan
                    Attached Files
                    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                    1992- project FE3..... 313 WHP @ 9.3psi




                    I pet my dash when I get into the car..."good car"
                    he actually has a mazda tree, parts grow on it

                    Comment


                      #11
                      Here's the reply i got back in response to payment options & methods from brad.
                      Attached Files
                      ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                      1992- project FE3..... 313 WHP @ 9.3psi




                      I pet my dash when I get into the car..."good car"
                      he actually has a mazda tree, parts grow on it

                      Comment


                        #12
                        my paypal is ready at hand.

                        hopefully we can get everything figured out from this point. im still very much intrested.
                        ~PaTricK~


                        -Current car's-
                        ~ 92 Probe GT Turbo, 90 FE3 Turbo 626GT hatch, 97 KL mtx 626, 05 Mazda6, 09 Kia Sportage V6~
                        What are you driving?

                        Comment


                          #13
                          Jesse(good talking with you), Ben, Patrick glad you could make it over. thanks for your support!!! i'll be arranging with paypal to accept everyone's payments. i'll have a fee calculator add things together & make another post accordingly
                          ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                          1992- project FE3..... 313 WHP @ 9.3psi




                          I pet my dash when I get into the car..."good car"
                          he actually has a mazda tree, parts grow on it

                          Comment


                            #14
                            gears

                            im down man i need a week in advance so pm me and im in ask about underdrive pulleys if this goes thru ?

                            Comment


                              #15
                              you have an FE3?

                              cool group buy ryan. why are these cheaper than the off the shelf BP gears, though...? LOL
                              Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
                              ... The first FWD BG with a Toyota E153 transmission conversion in the USA!
                              Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts

                              Comment

                              Working...
                              X