Thought Ide be the first to start off this section. My Project platform is a 1988 Mazda Familia(323) GT with the Factory Original 1.6l 16 valve DOHC Turbocharged engine.
It has seen many new additions/modifications since Ive recieved it.
Eventually, I would like to build it to a 300HP Sleeper. Will take alot of work, But from what ive seen from other people, The car/Engine have the potential.
As it sits:
-Chipped ECU by CorkSport In Vancouver, Remapped to run 16psi
-HKS Manual Boost Controller
-Turbo XS Type H Recirc/Atmospheric Blow Off Valve
-2.5" Catback Magnaflow Exhuast
-KVR Front Breakpads, and Slotted Rotors
-Full FMIC and Intake
-Civic Short Throw Shifter and MX3 Shifter Bushing
-A/C Delete (I wish the Previous Owner kept it )
-HKS Turbo Timer
-Digital Dash
-GTX Seats
-Kenwood Head Unit
-Alarm
-Escort Powered Moonroof Swapped
-Autometer Boost/Air-Fuel Ratio Guages in Piller Pod
-SlimFan Radiator Fan
-Euro Headlights
-HID Conversion
-JDM Clear Corners
Future plans include:
-Full Engine Overhual using Forged Internals
-LSD Transmission
-VJ Turbo Upgrade to support 300HP
-Ground Control Coilovers
-Alloys all around
-GTAe Bumper or IMark Front Bumper
-CorkSport Exhuast system (Turbo Back)
-Corksport FMIC
-Aluminum Radiator
-Full Inside Hub Break Upgrade
-Fresh Paint
-Megasquirt Stand-Alone Engine Management/Fuel Management
-Electronic Boost Controller
-MazdaSpeed engine/Transmission mounts
-Act or Exeddy Clutch
-Solid Swaybars
Im sure theres more, and I will post them as I go.
For pics, Redirect to my vb Gallery.
It has seen many new additions/modifications since Ive recieved it.
Eventually, I would like to build it to a 300HP Sleeper. Will take alot of work, But from what ive seen from other people, The car/Engine have the potential.
As it sits:
-Chipped ECU by CorkSport In Vancouver, Remapped to run 16psi
-HKS Manual Boost Controller
-Turbo XS Type H Recirc/Atmospheric Blow Off Valve
-2.5" Catback Magnaflow Exhuast
-KVR Front Breakpads, and Slotted Rotors
-Full FMIC and Intake
-Civic Short Throw Shifter and MX3 Shifter Bushing
-A/C Delete (I wish the Previous Owner kept it )
-HKS Turbo Timer
-Digital Dash
-GTX Seats
-Kenwood Head Unit
-Alarm
-Escort Powered Moonroof Swapped
-Autometer Boost/Air-Fuel Ratio Guages in Piller Pod
-SlimFan Radiator Fan
-Euro Headlights
-HID Conversion
-JDM Clear Corners
Future plans include:
-Full Engine Overhual using Forged Internals
-LSD Transmission
-VJ Turbo Upgrade to support 300HP
-Ground Control Coilovers
-Alloys all around
-GTAe Bumper or IMark Front Bumper
-CorkSport Exhuast system (Turbo Back)
-Corksport FMIC
-Aluminum Radiator
-Full Inside Hub Break Upgrade
-Fresh Paint
-Megasquirt Stand-Alone Engine Management/Fuel Management
-Electronic Boost Controller
-MazdaSpeed engine/Transmission mounts
-Act or Exeddy Clutch
-Solid Swaybars
Im sure theres more, and I will post them as I go.
For pics, Redirect to my vb Gallery.
Comment