aftermarket steering wheel

[smoke187]

ok so i finely mesured the mx3 steering wheel to find out that its 14-14 1/2" top to bottom out side diameter


this is what i want to install to replace it with its 280mm or 300mm that's 11 or 11.8 inches

http://www.momo.com/usa/products.php?id_cat=2&id_subcat=3&id_product=36&l=en

is that to small or is that an ok size to run i do need the room

[smoke187]

this is what it looks like installed in something i just googled it

[mx-3_4evr]

too small IMO. I have a 350mm one

[smoke187]

its only 3" smaller 350mm is 13" 1" smaller then stock

but im tall at 6ft+ so my knees hit the wheel when pushing the clutch but that might be the way the front of the seat lifts your legs higher in the front

[smoke187]

both the wheels that i have are both 13" and it don seem like it would hurt to drop another inch or 2

[smoke187]

too small IMO. I have a 350mm one

what adapter are you using?

i was going to get the momo miata hub will that work

[mx-3_4evr]

^yeah that would work. Do you have PS? I don't

[smoke187]

no i don't at the moment but everything is there its just missing the nut on top of the pump turning the wheel without it is very hard

[mx-3_4evr]

^ Weak ass! lol

[smoke187]

well only when the cars not moving and its sometimes a pain to park without ps

[Turpro]

Is the mx3 really that small inside? Makes a fatass like me not want 1.

[smoke187]

its not really small its just the steering wheel sits lower as far as i can tell