My HID kit from EBAY

[Turpro]

6000k 35 watt HI/LOW HID kit.

This is the company

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trksid=p3907.m32&_trkparms=tab%3DWatching&item=160310475680&viewitem=

First thoughts:
"Man this kit is cheap for a HI/LOW HID kit."
The shipment was very fast and the quality of the wires was great but the box was ****ty.



The ballast was super slim so you can mount them in great locations.





JDM with normal headlamp on passenger side. EDM headlight with HID on drivers side.



Boht HID and EDM headlamp


Low beam Maybe it needs adjusting(They are new lights as well so that may be the case)


High beam(I thought it was going to be HID as well. It is a dual bulb. HId lows and Halogen highs




Finally thoughts:
The good:
The ballasts are super slim and can be mounted in tight spots. I mounted them where they are because I'm lazy(lol). If you wanted to you could mount them where no one would see them. The wiring is super easy and has very good quality. Shipping was super fast(2 days). Good communication with seller.

The bad:
I was under the assumption that this was a HI/LOW HID kit with both highs and lows as HID. They are way too blue for my liking. The light output isn't as bright as I was expecting(this could be because the headlamps are new and also because they are only 35w).

Overall:
They are worth the 65 shipped I paid. Would I buy them again? No. I want a more true white HID kit.

[Kris]

i think i know what your looking for acura TL hid kit! i got these and are white. i would sell em to you but they are in my blue 323 and its in FL :o( cops out here say hid's are no good without projectors so it was those or my phillys :op

[Turpro]

Maybe I'm just seeing **** or maybe it takes a few times to get the bulbs to warm up nice because they are looking more white now

[yunvmyegt]

either way they look really bright over regular bulbs , i like them...

[monoxidechild]

they will break in actually. mine did at least.

you should just buy a new set of bulbs for the kit you already have. then keep these 6000k as a set of back up's.

[smoke187]

going to have to get my self a set but i will have to get a single low beam set for the new mx3 projectors they have h1 bulbs with a 9004 harness to connect to the car wounder how i would go about buying a kit for that

[worldhazard]

*watching vid*

i'm blind!!!! g'damnit!

[jaws]

I'm with you on that one.

[Turpro]

Ok took the first true drive this morning. I can say that the dr side headlamp needs adjusting bad. Its pointing down and towards the pass side. Its not bad bad but I can tell its off. The light on the ground was white but I did see a little blue in it. I need to find a flat 100ft of ground to adjust them properly. That should be fun to find lol.

[smoke187]

chris how did you connect an h4 hid kit to the stock 9004 connector did you have to use an adapter?

[Turpro]

chris how did you connect an h4 hid kit to the stock 9004 connector did you have to use an adapter?

My jdm headlights and corners came with pigtails on all the lights. I didn't know about the adapter so I spliced wires and connected them that way.

[smoke187]

ahh i see

[vabreaker20011]

yea when i turn mine on the get brighter as they warm up. i have the same ones as u w/o the high beam but i wish i went with like 5000k or so.

[Mazda_Powered]

i've heard the bulbs that last the longest are the single filament ones. the kit i was going to get for my 323 deleted the high beams but guaranteed a stupid ammount of hours.

JACK.

[Zexcort]

I have a set of hid's in my egt I got from ebay I love them except tha fact the high beams are tweety bird yellow I just never use high beams cause they look retarded lol