Hi folks, here is the long-awaited true Plug and Play (PNP) Megasquirt system for the FWD BP platform.
In a nutshell, this PNP MS unit will allow you to completely remove the stock computer and replace it with a fully tunable ECU without making any modification to your stock wiring harness. This means that you can install a standalone in less than 30 minutes and you can fully revert to your stock computer if need be in less time than that!
All of our units have the following features:
- Compatible with the following vehicles: 90-94 Mazda 323/Protege regardless of engine. 91-94 Escort GT, 90-94 Mazda GTX/GTR, BP powered Mazda MX-3. There may be others, ask me about a particular configuration.
- Fully programmable MSI ECU on the latest V3.0 PCB
- Full fueling and ignition timing control for up to 21 psi of boost
- Everything setup for you so that there is no fiddling with settings in Megatune or on the MS itself
- Pre-programmed fuel and ignition maps for the BP motor
- 5 feet of vacuum hose to connect the MS to your intake manifold
- CD including color instructions, base maps, tuning software, logging software
- Unit is professionally built and tested prior to shipping
- The only modifications needed to run the car on the MS is to unplug your stock ECU, plug in the MS, run a vacuum line for the map sensor and turn the key!
- Warranty against defects for 3 months from time of purchase
- Full product support until the car starts
- The MS units can later be upgraded to fit larger MAP sensors, MSII CPUs, Boost Control, Flat Shift, etc.
All pricing and ordering information is now on our website:
http://www.stratifiedauto.com/
So please visit there if you'd like more information or would like to place an order.
As always, I am dedicated to quality and integrity and will ensure every customer is treated fairly and respectfully and receives a quality product.
Thank you,
Alex Gutica
Stratified Automotive Controls[URL="http://www.stratifiedauto.com/"]
In a nutshell, this PNP MS unit will allow you to completely remove the stock computer and replace it with a fully tunable ECU without making any modification to your stock wiring harness. This means that you can install a standalone in less than 30 minutes and you can fully revert to your stock computer if need be in less time than that!
All of our units have the following features:
- Compatible with the following vehicles: 90-94 Mazda 323/Protege regardless of engine. 91-94 Escort GT, 90-94 Mazda GTX/GTR, BP powered Mazda MX-3. There may be others, ask me about a particular configuration.
- Fully programmable MSI ECU on the latest V3.0 PCB
- Full fueling and ignition timing control for up to 21 psi of boost
- Everything setup for you so that there is no fiddling with settings in Megatune or on the MS itself
- Pre-programmed fuel and ignition maps for the BP motor
- 5 feet of vacuum hose to connect the MS to your intake manifold
- CD including color instructions, base maps, tuning software, logging software
- Unit is professionally built and tested prior to shipping
- The only modifications needed to run the car on the MS is to unplug your stock ECU, plug in the MS, run a vacuum line for the map sensor and turn the key!
- Warranty against defects for 3 months from time of purchase
- Full product support until the car starts
- The MS units can later be upgraded to fit larger MAP sensors, MSII CPUs, Boost Control, Flat Shift, etc.
All pricing and ordering information is now on our website:
http://www.stratifiedauto.com/
So please visit there if you'd like more information or would like to place an order.
As always, I am dedicated to quality and integrity and will ensure every customer is treated fairly and respectfully and receives a quality product.
Thank you,
Alex Gutica
Stratified Automotive Controls[URL="http://www.stratifiedauto.com/"]
Attached Files
Comment