Hey guys, I have a question about how to position a Wideband and Pyrometer probe in my exhaust. I'm building a new dp for the car and I've seen 2 different types of bungs to install the sensors. The first one will put the sensor at 90 degrees to the direction of exhaust flow, and the other puts it at 45 degrees. I have a sweet picture to show you what I mean.
I am planning on going with the 45 degree bung, as I will only be using 2.5" pipe, and I figure the 45 degree ones will help with keeping the exhaust flow up.(Slightly, I know, but every bit helps). I just basically want to know if the 45 degree orientation will affect things badly in any way? Like will the sensors not read properly is my main concern?
Thanks guys.
I am planning on going with the 45 degree bung, as I will only be using 2.5" pipe, and I figure the 45 degree ones will help with keeping the exhaust flow up.(Slightly, I know, but every bit helps). I just basically want to know if the 45 degree orientation will affect things badly in any way? Like will the sensors not read properly is my main concern?
Thanks guys.
Comment