Announcement

Collapse
No announcement yet.

part compatibility mx3/protege

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    part compatibility mx3/protege

    im going to be getting rid of the protege soon as i am finished with my mx3 pretty close to starting it up for the first time since i started working on it what can i take off the protege lx

    i am already taking engine,trans,engine harness,p/g harness,struts/springs,cs exhaust

    i would like to know if i can also remove and use on my mx3 with rear drums if i am missing anything please tell me but only if you know for sure it fits

    front brake setup
    rear brake setup for disk swap?
    brake master cyl
    clutch master cyl

    #2
    anyone have any clue if the rear hubs will swap over to the mx3 for a rear disk swap?

    Comment


      #3
      yeah everything fits over

      Comment


        #4
        cool thanks

        Comment


          #5
          i love my tie-bar



          sigpicWorlds first car with GPS was a Mazda



          ~~~~~~~~> Thanks again to member gooseinyou for the familia garnish <~~~~~~~~

          Comment


            #6
            ok

            Comment


              #7
              i think you can swap over the brake cyl but then you'll ahve trouble with intakes
              In the Garage
              Black 93 MX-3 GS
              Bp powered
              GTR Drive Train


              The ProjectMx build thread
              MyCardomain[/SIZE]

              "Shut up, at least the bunnies are on fire!"

              Comment


                #8
                If you're gonna do the rear disc swap, you should also get the portioning valve off the firewall... that way the discs in the rear get the right amount of fluid pressure versus the drums.

                JoN - Automotive Machinist Journeyman/Refrigeration Mechanic Journeyman
                Member of MX-3.com
                1996 Mazda MX-3 RS - Creek Blue Mica
                1993 Mazda MX-3 GS SE - Raspberry... RIP


                Racing BP (Project "Blue" Marlin)... Twin Scroll GT3071R, breaking 30psi at the moment!

                "Do it ONCE, do it RIGHT!"

                Comment


                  #9
                  thanks i will have to remember that

                  Comment


                    #10
                    gonna sell those fan blades before you sell it? I can bring by some steelies to throw on there with tires so you could get it to the yard.
                    2011 BMW 128i 6 Speed Manual -- dd
                    1990 Protege 4WD 5 Speed

                    Comment


                      #11
                      what about the coolant tank for the protege will that fit i would go aftermarket but good ones go for $100

                      Comment

                      Working...
                      X