Okay i recently aquired a ms1 from a guy on feoa. and i plan on putting it in my 1.9l ford escort ( turboed obviously ) but since its a 96 it has an ohh harness. go figure. it has a 37 pin harness adapter on it. and like 3 inches of the wires hanging off. I think i could figure out where they all goo and run wires to the designated areas but i want to know what route other people would take in this situation.
currently i dont have a job but i think im getting a job at a local garage this monday coming up ( just finished my first year of college as an automotive service tech )
just curious what other people would do to wire it in for example
just try to wire it as is
buy a relay board and relay cable and make my own harness
or find another escort with a obd1 harness and buy the adapter you guys make
feel free to chime in and call me a
EDIT : i dont have a db9 connection on my laptop(db15) so i have to wait for the db9 to usb adapter to arrive from ebay to see what im working with
currently i dont have a job but i think im getting a job at a local garage this monday coming up ( just finished my first year of college as an automotive service tech )
just curious what other people would do to wire it in for example
just try to wire it as is
buy a relay board and relay cable and make my own harness
or find another escort with a obd1 harness and buy the adapter you guys make
feel free to chime in and call me a
EDIT : i dont have a db9 connection on my laptop(db15) so i have to wait for the db9 to usb adapter to arrive from ebay to see what im working with
Comment