Announcement

Collapse
No announcement yet.

best way to remove engine on egt?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    best way to remove engine on egt?

    would it be easier to remove front subframe bolts and roll it out or just do it the traditional way unbolt from motor mounts/ and axles from tranny and just lift it?

    #2
    once you get all of ur wiring/hoses disconnected...

    pull the axles.. and shift linkage

    remove the pass. side motor mount pass thru bolt, then remove the 4 bolts holding drivers side trans mount to the frame,
    then get under and pull the 4 nuts (2 on each) from the bottom mounts...

    the motor will then be sitting on the subframe, and ready to pull

    This is how i pulled the motor from my parts car and it took me 45 mins working alone


    94 Pro LX- 3-hole. Familia seats, Infini Corners, Familia Grille, Familia Rear Garnish w/Rear fogs EDM Glass headlights,
    MSP Mazdaspeed Muffler,Mazdaspeed front strut bar,'00 Pro ES wheels, Neuspeed Springs,GR2s, MX3 wheel, MX3 Tall armrest

    Comment

    Working...
    X