Well my other "worklog" ("blown transmission pushes me for complete retoration") got too many pages, so I'm starting from scratch. I bought my MX-3 in December of 2006. I pretty much saved it from going to the JY. I went through 2 B6DE engines and a F-series transmission in less than 2 years. Then I got crazy and built the BP ITB. Now it's time for boost. (that made it seemed like I didn't do **** to it lol) And yes, all my N/A parts will be for sale once starts snowing here in MN.
So I'm going to start from here. These are parts that I would like to gather during winter, so by spring I can have it ready for summer fun: (+ have it already, - don't have it yet)
+Turbo exhaust manifold
+Holset HY35W
-AN- fittings for oil to turbo and drain
-tap oil pan
+Synapse BOV (recirculated)
+Tial 38mm wastegate
-Boost controller
-Innovate boost gauge
-2.5" SS turbo back, no cat, resonator, and a really quiet muffler (I might go with 2 mufflers and no resonator Magnaflow) All in V-BAND
-Front mount intercooler (probably off eBay or craigslist)
-2.5 intercooler pipes with t-bolt clamps
+GTX intake manifold with a Mustang TB 68mm
+RX-7 460cc injectors
-255 Walbro fuel pump
+B6T rods
-Forged pistons (wiseco or supertech)
-Rod/main bearings
+GTX exintake cam
+G-series tranny
+Mfactory LSD
-BP light weight flywheel
-KY Clutch kit 2200#
-Tune
Also, I'm doing suspension mods as well:
+Wytbishop polyurethane bushings 90A front, 70A rear
-Powder coat front and rear suspension components
-Whiteline rear sway bar
-Ksport camber plates
Comments and suggestions are welcomed. I will post new pics as I get new parts. Let the fun begin!
So I'm going to start from here. These are parts that I would like to gather during winter, so by spring I can have it ready for summer fun: (+ have it already, - don't have it yet)
+Turbo exhaust manifold
+Holset HY35W
-AN- fittings for oil to turbo and drain
-tap oil pan
+Synapse BOV (recirculated)
+Tial 38mm wastegate
-Boost controller
-Innovate boost gauge
-2.5" SS turbo back, no cat, resonator, and a really quiet muffler (I might go with 2 mufflers and no resonator Magnaflow) All in V-BAND
-Front mount intercooler (probably off eBay or craigslist)
-2.5 intercooler pipes with t-bolt clamps
+GTX intake manifold with a Mustang TB 68mm
+RX-7 460cc injectors
-255 Walbro fuel pump
+B6T rods
-Forged pistons (wiseco or supertech)
-Rod/main bearings
+GTX exintake cam
+G-series tranny
+Mfactory LSD
-BP light weight flywheel
-KY Clutch kit 2200#
-Tune
Also, I'm doing suspension mods as well:
+Wytbishop polyurethane bushings 90A front, 70A rear
-Powder coat front and rear suspension components
-Whiteline rear sway bar
-Ksport camber plates
Comments and suggestions are welcomed. I will post new pics as I get new parts. Let the fun begin!
Comment